Specifications

250w 12v led waterproof power supply
Specialized manufacture
Built-in EMI filter
Abnormality protection

  Features:

1. 250w 12v led waterproof power supply .

2. The product consists of indoor type and outdoor type.

3. Convenient wiring.

4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .

5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.

6. Quality assurance: 2 years warranty.

7 High efficiency .

8.International AC input .

9.Built-in EMI fiter .

10.100% full load burn-in test .

 

FX Waterpoof type FX250-W1V
MODEL		12V 250W	15V250W	24V 250W	27V 250W	48V 250W
OUTPUT	DC VOLTAGE	12V	15V	24V	27V	48V
	RATED CURRENT	20A	16A	10A	9A	5.2A
	CURRENT RANGE	0~16.5A	0~13A	0~8.3A	0~7.4A	0~5.2A
	RATED POWER	250W	250W	250W	250W	250W
	RIPPLE& NOISE (MAX.)NOTE2	150mV	150mV	150mV	150mV	200mV
	VOLTAGE TOLERANCENOTE3	±1%	±1%	±1%	±1%	±1%
	SETUP , RISE TIME	200ms/220VAC 100ms/220VAC
	HOLD UP TIME(Typ.)	20ms/220VAC
INPUT	VOLTAGE RANGE	170~264VAC
	FREQUENCY RANGE	47~63Hz
	POWER FACTOR(Typ.)	PF>0.6/220VAC
	EFFICIENCY(Typ.)	80%	83%	84%	85%	86%
	AC CURRENT(Typ.)	5.0A/115VAC 2.5A/230VAC
	INRUSH CURRENT(Typ.)	COLD START 25A/115VAC 50A/230VAC
PROTECTION	Short circuit	Protection type : recovers automatically after fault condition is removed
	Over load	105~135% hiccup mode , auto-recovery
	Over voltage	115%~135% Cut off the output , auto-recovery
	Over temperature	Rectifier ≥90°C cut off the output , auto-recovery
ENVIRONMENT	WORKING TEMP	-20°C~ +60°C
	WORKING HUMIDITY	20%~90%RH
	STORAGE TEMP , HUMIDITY	-40°C~+85°C,10%~90%RH
SAFETY & EMC	SAFETY STANDARDS	CE,ROHS
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006;
		EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006
NOTE	1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr . 3.Tolerance : includes set up tolerance , line regulation and load regulation .

 

 

Procedures

Certifcates

Express