Shenzhen SANPU CE ROHS approved 250W 48v led transformer driver for led bulb dual output power supply 12v 24v
USD $1 - $25 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
Shenzhen SANPU CE ROHS approved 250W 48v led transformer driver for led bulb dual output power supply 12v 24v
Feathers:
1. Universal AC input / Full range;
2. 100% full load burn-in test;
3. Built-in EMI fiter with tiny ripple;
4. High efficiency, high qulity, long life and high reliability;
5. Abnormality protection function : short circuit ,over load ,over voltage,over temp;
6. Convenient wiring;
7. The product consists of indoor type and outdoor type;
8. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
MODEL | 12V250W | 15V250W | 24V250W | 27V250W | 48V250W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 27V | 48V |
RATED CURRENT | 20A | 16A | 10A | 9A | 5.2A | |
CURRENT RANGE | 0~20A | 0~16A | 0~10A | 0~9A | 0~5.2A | |
RATED POWER | 250W | 250W | 250W | 250W | 250W | |
RIPPLE& NOISE (MAX.)NOTE2 | 150mV | 150mV | 150mV | 150mV | 200mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | ±1% | ±1% | |
SETUP , RISE TIME | 200ms/220VAC 100ms/220VAC | |||||
HOLD UP TIME(Typ.) | 20ms/220VAC | |||||
INPUT | VOLTAGE RANGE | 85~132VAC 170~264VAC | ||||
FREQUENCY RANGE | 47~63Hz | |||||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||||
EFFICIENCY(Typ.) | 80% | 83% | 84% | 85% | 86% | |
AC CURRENT(Typ.) | 5A/115VAC 2.5A/230VAC | |||||
INRUSH CURRENT(Typ.) | COLD START 25A/115V 50A/230VAC | |||||
PROTECTION | Short circuit | Protection type : recovers automatically after fault condition is removed | ||||
Over load | 105~135% hiccup mode , auto-recovery | |||||
Over voltage | 115%~135% Cut off the output , auto-recovery | |||||
ENVIRONMENT | WORKING TEMP | -20°C~ +60°C | ||||
WORKING HUMIDITY | 20%~90%RH | |||||
STORAGE TEMP , HUMIDITY | -40°C~+85°C,10%~90%RH | |||||
SAFETY &EMC | SAFETY STANDARDS | CE,ROHS | ||||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
EMC Test Standards | Conform to EN60950 GB4943 UL60950 Safety standards | |||||
Conform to GB9254 EN55022 EMC standards | ||||||
NOTE | 1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr . 3.Tolerance : includes set up tolerance , line regulation and load regulation . | |||||
Q: What the power supply can be used for ?
A: Good for led lights,cctv,atx,lcd tv,lg tv,etc.
SHENZHEN SHANPU INTLLIGENT TECNOLOGY CO., LTD. is special power supply Manufacturer. Our factory specializes in switching power supply. Switching power supply can be used for strip light, point source, led hurdle lamp, flash light,light bulb, led COB ceiling light, led downlight, led spotlight, etc.
·8 years driver/power supply experience with rich research and development
department;
· We accept ODM and OEM based on clients' needs;
· Accept any transportation ways;
· Sustainable techincal supporting and assistance;
· 2 years warranty;
· CE&ROHS,Conform to EN60950 GB4943 UL60950 Safety standards, Conform to GB9254 EN55022 EMC standards;
·Your inquiry related to our products or prices will be replied in 24hrs;
·Welltrained and experienced staffs to answer all your enquiries in fluent English.