Specifications
Alumina NItride Substratefessional manufacturer
2.CE certificate
3.wear resistant
4.Electrical insulator
ZhengZhou STA high quality alumina NItride Substrate ceramic substrate
The aluminum nitride ceramic plate has high thermal conductivity of more than 170W/m.k,
high density, low dielectric loss, good insulation and some other excellent properties.The ALN substrate is
the best choice for a wide range of industrial insulating heat sink material of high power machinery
and equipments such as highfrequency equipment substrate, high power transistor module substrate,
high density hybrid circuits, microwave power devices, power semiconductor devices, power electronic
devices, optoelectronic components, laser-semi-conductor, LED, IC products, and so on.
the technical data of the ALN plate
Property content | Property index |
Density(g/cm3) | ≥3.30 g/cm3 |
Water absorption (%) | 0 |
Thermal conductivity(20°C, W/m.k) | ≥170 |
Linear expansion coefficient (RT-400°C,10-6/°C) | 4.4 |
Flexural strength (MPa) | ≥330 |
Bulk resistance (Ω.cm) | ≥1014 |
Dielectric constant(1MHz) | 9.0 |
Dissipation factor (1MHz) | 3×10-4 |
Dielectric strength (KV/mm) | ≥15 |
Surface roughness Ra(μm) | 0.3~0.5 (≤20nm) |
Camber (~/25.4(length)) | 0.03~0.05 |
Appearance | Dense |
the detail size of the ALN plate
Thickness(mm) | Length*Width(mm) | ||||||||||
0.385 | 2″* 2″ 50.8*50.8mm | 3″* 3″ 76.2*76.2mm | 4″* 4″ 101.6*101.6mm | 4.5″* 4.5″ 114.3*114.3mm | |||||||
0.5 | |||||||||||
0.635 | |||||||||||
1.0 | |||||||||||
| Diameter(mm) | ||||||||||
1.0 | Φ16 Φ19 | Φ20 Φ26 | Φ30 Φ35 | Φ40 Φ45 | Φ50 Φ52 | Φ60 | Φ75 | Φ80 | |||
1.2 | |||||||||||
1.5 | |||||||||||
2.0 | |||||||||||
2.5 | |||||||||||
PS: Other dimensions which are not listed are available upon your requests. |
Item |
| Standard values
| Test method
|
Wall thinkness | 100CPSI | 0.45MM±0.03 | vernier caliper |
200CPSI | 0.36MM±0.03 | vernier caliper | |
300CPSI | 0.28MM±0.03 | vernier caliper | |
400CPSI | 0.21MM ±0.03 | vernier caliper | |
Overall dimensions | OD:<100MM | ±1.0MM | vernier caliper |
≥100MM | ±1% | vernier caliper | |
Height:<150 | ±1.0 | vernier caliper | |
≥150 | ±1%Height | vernier caliper | |
Internal crack |
|
| Bright light perspective |
products showing