China Automatic Wire Nail Making Machine
Features of automatic wire nail making machine:
Automatic wire nail making machine adopts plunger type structure to ensure its high working speed, low noise and low impact characteristics.
High working speed, 2 years warranty.
Company introduction:
We are one of the leading manufacturers of automatic wire nail making machine in China, our factory established in 1987, with a long history, we have professional
technology, andthe best after-sale services, all products are be offered 2 years
warranty.
Technical data of automatic wire nail making machine:
Model | Z94-1C |
Z94-2C
| Z94-3C | Z94-4C | Z94-5.5C |
Max. dia. of nail | 1.6mm | 2.8mm | 3.5mm | 4.5mm | 5.5mm |
Min. dia. of nail | 0.9mm | 1.2mm | 1.8mm | 2.8mm | 3.8mm |
Max. Length of nail | 25mm | 50mm | 75mm | 100mm | 150mm |
Min. length of nail | 9mm | 16mm | 30mm | 50mm | 80mm |
Motor power | 1.5kw | 2.2kw | 3kw | 4kw | 5.5kw |
Nail making speed | 450pcs/min | 350pcs/min | 320pcs/min | 260pcs/min | 200pcs/min |
L*W*H | 1.5*1.3*1.2m | 1.7*1.3*1.4m | 2.0*1.4*1.4m | 2.2*1.6*1.65m | 2.5*1.6*1.5m |
Weight | 1.2tons | 1.45tons | 1.8tons | 2tons | 2.3tons |
The flow process of automatic wire nail making machine:
scrap or new steel → wire drawing → nail making → polishing →end nails
Wire drawing machine: Single horizontal wire drawing machine.
Name | Model | Max Inlet wire diameter | Min outlet wire diameter | Motor power | Output | Remarks |
Single horizontal wire drawing machine | WSL550 | 10mm | 2.0mm | 11kw | 56m/min | This is horizontal single wire drawing machine, it is suitable for small plant or the output is not too big, it need to draw the wires again and again to get the fine diameter you want. |
WSL650 | 14mm | 2.0mm | 18.5kw | 65m/min |
Wire drawing powder: to reduce the friction between the wire and wire drawing dies.
Nail making machine:
To get the nails in the different diameter and length.
Nail moulds:
Wire holder: to put the wires on it when drawing wirs and making nails;
Gripper die: to control the length of nails;
Cutter die: to cut the wires when making nails;
Header die: to make the head of nails
Polishing machine: to make the nails brightening.
Model | Motor power | L*W*H | Weight | Capacity of nails |
SD-1000 | 7.5kw | 2.0*1.5*1.4m | 800kg | 1 ton |
SD-400 | 2.2kw | 1.64*0.9*1.0m | 500kg | 400kg |
Auxiliary equipments:
Point rolling machine: It is used to sharpen the head of the wire, then the wire can beeasily get into the mouth of the nail machine.
Grinder:
used to make the cutter die sharp.
Butt welding machine: to weld the broken wires when drawing wires.
1. More than 20 years producing experience, good quality;
2. Low noise, high working speed;
3. 2 years warranty;
4. Engineer is available to help overseas;
5. Factory visiting is welcomed anytime.