Name: DVB T2 Modulator/DVB-T2 Modulator With PDP Function
Brand: Shineco
Availability: InStock

Product Details

DVB T2 Modulator/DVB-T2 Modulator With PDP Function

Add Jacky Skype To Talk Details:Jacky.shineco

Product Description

Outline

SNK6284 ( SNK6284A) DVB-T2 modulator is our new product developed complying with the DVB-T2 standard. With its advanced modulating technology, this modulator can effectively make use of the ground spectrum resources and make it possible to provide reliable signals for fixed, mobile and portable devices. Compared with DVB-T, the channel capacity is increased by 30% under the similar carrier to noise ratio (CNR) threshold. SNK6284 ( SNK6284 A) DVB-T2 modulator also supports single-PLP and multi-PLP (option) to receive T2-MI from DVB-T2 gateway through its ASI and IP port. (This function is also option.)

Moreover, this device can be upgraded and controlled through network system, which allows it to be widely used in setting up digital broadcasting network and provide good signals for scientific laboratory and DVB-T2 STB.

Features

1. Fully complying with EN302 755 standard

2. 4 ASI input ports (for 1 channel TS input with 3 ports for backup)

3. TS over IP input (UDP); T2-MI over IP input (Option)

4. 10MHz input/loop out, 1PPS input/loop out

5. DVB-T2 RF output

6. Supports single PLP, multi-PLP (Option)

7. Support MISO and SISO

8. Support QPSK/16QAM/64QAM/256QAM (normal or rotated)

9. Support TS format: T2-MI (Option) or TS (Mode A)

10. High performance output: MER>43dB, shoulder level>56dB

11. Output signal bandwidth: 5M, 6M, 7M, 8MHz

12. Support MFN and SFN (Option) net mode

13. Supports non-linear and linear digital pre-distortion (DPD) --->Video

14. RF output level: -25~+3 dBm, 0.1db stepping

14. Constant temperature crystal oscillator, as high as 0.1ppm stability

15. Support online upgrade

16. Keyboard operation and LCD display

17. Web Network management system (GUI)

Specification

Input	T2MI input over ASI and IP (Option)		1000 Mbps Ethernet port ----SNK6284A
			100 Mbps Ethernet port ----SNK6284
	1 channel TS input over ASI, TS over IP port (UDP)
	10MHz reference clock input and loop out, BNC interface
	1PPS input and loop out, BNC interface
Modulation	Standard	EN302 755
	Mode	Mode A: single-PLP; Mode B: multiple-PLP (Option)
	PLP Constellation	QPSK, 16QAM, 64QAM, 256QAM (Normal or Rotated)
	L1 Post Constellations	BPSK, QPSK, 16QAM, 64QAM
	FEC Length	Short(16K), Normal (64K)
	FEC Rate	1/2, 3/5, 2/3, 3/4, 4/5, 5/6
	Pilot Pattern	PP1 - PP8
	Guard Interval	1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
	FFT Mode	1k, 2k, 4k 8k, 16k, 32k (normal or extended)
	Bandwidth	5MHz, 6MHz, 7MHz, 8MHz
	Net Mode	MFN, SFN (Option)
RF Out	Connector	N Type, 50ΩImpedance
	RF range	30~999Mhz, 1hz stepping
	Output level ATT	-25~+3 dBm, 0.1db stepping
	MER	> 43db
	Shoulder Level	>56dB
System	LCD display, keyboard and web Network management
	Supporting software upgrading through network
General	Demission (WLH)			482mm×410mm×44mm
	Weight			4.8kg
	Temperature			0~45℃(operation),-20~80℃(storage)
	Power supply			AC 220V±10%,50/60Hz
	Power Consumption			34W