Specifications

P102001 Tattoo Machine Vise Screw
1.Contact Screws
2.Stable performance
3.High quality
4.Tattoo machine parts

 New products show 

P102001 Tattoo Machine Vise Screw

We make 8wraps, 12warps, 14wraps tattoo machine too.

Welcome to customize, make tattoo machine according your style and requirements.

Suppy different  materials for tattoo machine, like iron, brass,  stainless  steel, copper, etc.

Model	P102001 Tattoo Machine Vise Screw
Frame Material	Contact Screws
Construction	Contact Screws
Purpose recommended	Liner or Shader  Sell Tattoo Machines Factory
Color	White
Working Voltage	3-12V
Starting Voltage	3V
Running Speed	7200 switch / min Sell Tattoo Machines Factory
Capacitor	47μ
A-Bar Material	Pure Alloy Sell Tattoo Machines Factory
Front Binder Material	Alloy
Rear Binder Material	Alloy Sell Tattoo Machines Factory
Spring Thickness	0.50mm rear spring & 0.50mm front spring
Optimum Voltage	5~8V
Dimensions	(3.03 x 2.87 x 0.79)" / (7.7 x 7.3 x 2)cm (L x W x H)

 

 

 Payment:  

                     

Region	Shipping Agent	Days
US,CA	UPS/DHL/Fedex	3-4(EMS +4days)
UK,IR,W/E Europe	UPS/DHL/Fedex	3-5(EMS +4days)
Middle East	UPS/DHL/Fedex	3-5(EMS +4days)
AU,NZ	UPS/DHL/Fedex	3-5(EMS +4days)
Asia	UPS/DHL/Fedex	3-4(EMS +4days)
Afeica	UPS/DHL/Fedex	4-6(EMS +4days)
South America	UPS/DHL/Fedex	3-5(EMS +4days)
Russia	UPS/DHL/Fedex	contact me

 

Q: Does Freedom Tattoo Supplies take Returns?

A: Yes we do. Customer must either call or e-mail us explaining the reason for the return. Return shipping of item(s) is the responsibility of the customer. If the mistake is on our part, we will ship out replacement item(s) free of charge. Flash, opened needles, or opened disposable tubes are non-returnable under any condition.

Q: How do you ship orders?

A: We have five express: UPS, FEDEX, DHL, EMS. For big order, we'll dispatch by sea.

Q: How long will it take to receive my order?

A: We will make every effort to ship your order within 3-7 business days of receipt. During the holidays, our order processing time may increase due to backups.

Q: What payment methods are accepted?

A:We accept three payments: Bank Transfe, West union, PayPal.

         

 

         

 

     

           

 

 

 Extra Info. 

Why can‘t start the machine?

Malfunction	Solution
The elastic rod does not touch the contact point of the inclined spring plate	Loosen the screw of elastic rod, rotate down the elastic rod to the contact point, and then regulate the rod to the right position. Finally tighten the screw to lock the elastic rod.
The switch is off	Connect it to 220V AC power supply and turn on the switch. The indicator turns red.
Both of adjustable knob (VOLTAGE) and V meter hand are in "0"	Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving and should stop at 10V-12V.
The elastic rod touches the contact point of front spring so tightly that the machine cannot start and maybe will cause short circuit. Turn on the switch and the indicator turns green (No voltage)	Loosen the screw of elastic rod, rotate up the elastic rod and then rotate it down to the contact point, and finally regulate it to the right position. Restart the power, the machine will be ok.
Disconnection	Check the foot switch and the plug to avoid disconnecting the cord from the joint position caused by careless jerk.
Broken wires	The wires be susceptible to damage while washing and sterilizing the tattoo machine, so please confirm the wires condition and have the broken ones welded before use.
Problems of plugs and foot switch	Turn on the switch and check whether the plugs of cord and foot switch are broken or not, when short circuit happens (green indicator). The damaged ones should be welded with electric welding rod.

 

 Products List