Specifications

Geothermal Ground Source Heat Pump
Water Source Heat Pump
Water to Water Heat Pump
Heating Only
Heating+Cooling+Hot Water

Geothermal Ground Source Heat Pump

Water Source Heat Pump

Water to Water Heat Pump

Heating Only

Heating+Cooling+Hot Water

 

MODELS: LTWH(R)-020---LTWH(R)-100

Heating Capacity: 8.6-41KW

Cooling Capacity: 7.2-37KW

 

Model Specification:

LT WH (R) --- 020

LT-LVTE Company; WH-Scroll Compressor;

R-Units Type, R for Heat Pump(Heating and Cooling); 020-Model No.

 

Features:

APPLICATION

Used an area of 100m 2~ 1000m2 building. It can make free living hot water for demand as Villa, hotel, restaurant, factory,

theater, stadium, residential quarter, textile, food, medicine, metallurgy etc.

STRUCTURE

Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to

atmospheric agents.

HERMETIC COMPRESSORS

Use brand hermetic scroll compressor with built-in thermal overload cut-out and crankcase heater, mounted on rubber

vibration dampers. with low energy consumption, stable operation, and little vibration and low noise.

EVAPORATOR

High efficiency tube in tube or coaxial heat exchanger, factory insulated with flexible close cell material.

CONDENSER

High efficiency tube in tube or coaxial heat exchanger, factory insulated with flexible close cell material.

REFRIGERANT CIRCUIT

Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch

and low pressure switch.T he heat pump units are complete also with 4-way valve and one way valve.

HYDRAULIC CIRCUIT

Built with user side and source side water inlet/outlet connectors, water discharge connectors.water discharge connectors,

air vent valve,

ELECTRIC PANEL  

Consists of: Compressor contactor, Compressor protection breaker, User side water pump contactor (for mod.020÷100), User side water pump breaker (for mod. 020÷100), Microprocessor with function display.

 

OPTIONAL

Sight glass which must be installed in factory,

Source side water flow switch,

Source side water pump,

Anti-vibration rubber,

Metallic filter for the water circuit.

Desuperheater as optional

 

Notes:

1.Cooling Standard Conditions:User side water inlet/outlet 12°C/7°C;Water source side inlet/outlet 30°C/35°C.

2.Heating Standard Conditions: User side hot water inlet/outlet 40°C/45°C;Water source side inlet/outlet 15°C/7°C;

3.Heat recovery equipments can be added for free sanitary hot water.