Specifications

Air conditioning fan coil unit
-Floor Standing Type Coil Unit
-FP-34 to FP-238
-Air Flow:340-2380m3/h
-Used for Terminal

 

 

 

Air Conditioning Fan Coil Unit with Thermostat Residential Floor Standing Type Fan Coil Unit, Vertical Fan Coil

 

 

The FP series water chilled fan coil units are designed specially to meet the varied requirements of zone cooling or heating using chilled water or hot water. Fan coil can be applied to two or four pipe systems to satisfy the requirements of a wide variety of air conditioning or heating application. The FP series is available in concealed and exposed versions for ceiling and floor installation. This unit is presented as a single block including: fan deck, cooling and/or cooling coil, removable filter, drip tray, electrical connection box and decorative cabinet (excluded for concealed version).

FEATURES

INSIDE UNIT

Panels and frame are made of galvanized steel, properly punched and punched for fixing both accessories and the unit itself, either to wall (vertical version) or ceiling (horizontal version).

HEATING COIL

The coils are made of seamless tubes expanded into aluminum fins in continuous block. The connections have brass headers with female fittings and provided with easily accessible vent and drainage valve.

FAN DECK

The fan decks are composed of double suction centrifugal fans with aluminum impellers and 3-speed fan motors. Each fan motor assembly is dynamically balanced.

FILTER

The easily removable filter is made of filtering honeycomb polypropylene fabric and supported by an aluminum or plastic frame.

DRIP TRAY

The drip trays are made from sheet metal treated with polyester powder coating to ensure total resistance to atmospheric agents. The “L” type tray makes the units suitable for both vertical and horizontal installation.

ELECTRICAL CONNECTION BOX

All electric wires are connected to enclosed electrical terminal block, situated on the opposite side to the water connections.

DECORATIVE CABINET

The decorative cabinet has a modern design that blends in with any environment. It’s made from galvanized steel treated with polyester powder coating to ensure total resistance to rust, corrosion, chemical agents, aliphatic solvents and alcohols.

The discharge grille and supporting legs are made of ABS materials.

ON-BOARD THERMOSTART

Mechanical type for two pipe system exposed version use, working mode selection (OFF-Heating-Cooling), ventilation (HIGH-MED-LOW) and room temperature setting.

OPTIONAL

1. Condensation tray (water connection area)

2. Different type thermostats with more advanced functions

3. High external static pressure 30Pa and 50Pa 

MODEL

AIR FLOW (M3/H)

COOLING CAPACITY (KW)

HEATING CAPACITY (KW)

WATER FLOW (Kg/H)

WATER RESISTANCE (KPa)

MOTORPOWER(W)

NOISE(dB)

HIGH

MID

LOW

0Pa

30Pa

50Pa

0Pa

30Pa

50Pa

INPUT

OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

 

THREE ROWS	FP-34	340	255	190	2.15	3.4	340	7	39	10	44	12	49	16	35	36	37
	FP-51	510	383	287	3.13	4.45	480	15	54	16	59	20	66	25	36	38	39
	FP-68	680	510	383	4.17	6.32	655	28	62	20	72	25	84	30	37	39	41
	FP-85	850	683	478	5.09	8.42	814	8	75	25	85	30	99	40	40	42	44
	FP-102	1020	765	574	6	10.5	936	14	92	30	104	40	118	50	42	44	46
	FP-136	1360	1020	765	8.15	11.32	1260	19	125	20*2	147	25*2	171	30*2	44	47	49
	FP-170	1700	1275	956	9.75	14.2	1600	28	152	25*2	170	30*2	203	40*2	46	48	50
	FP-204	2040	1530	1148	11.7	16.52	1910	44	189	30*2	212	40*2	240	50*2	47	50	52
	FP-238	2380	1785	1340	13.65	20.15	2180	71	228	40*2	253	50*2	285	60*2	49	52	54

Fan							Forward curved lamina, double air- inlet Centrifugal
Motor							Single phase capacitive asynchoronous motor 220V 50HZ AC
Coil		Structure Type					Copper Tube, Aluminium Fin
		In/out Water Pipe					3/4" Internal Whorl
		Work Pressure					1.8MPa
Water Receiving Pan							3/4" Outer Whorl

 

Every year we attend Guangdong fair