DL Series Evaporator for Cold Room Preservation
USD $100 - $2,000 /Piece
Min.Order:1 Piece
Shandong Lvte Air Conditioning System Co., Ltd.
DL Series Evaporator for Cold Room Preservation
Features of Evaporator for Cold Room:
D series Air Cooler Evaporator is a kind of cooling equipments which used with refrigerant units application for different cold rooms. It is clasified three category including DL, DD, DJ by different cold room temperature. DL series applied for 0°Cpreservation cold room; DD series applied for about -18°C cold storage; DJ series applied for -25°C frozen storage.
Features
Unit cabinet of steel plate with plastic spray, corrosion proof, and pleasant looking;
Mechanically expanded pipes with AL fins with good heat transfer performance;
Inside are evenly arranged with defrosting heaters;
The bottom has double water receiver, effective for anti-freezing;
Long distance air throw is optional.
External rotor fan for low temperature, with low noise, high efficiency, and reliability.
Evaporator for Cold Room Advantages:
1)Coil made of Diameter12.7 effcient copper tube with internal thread, 37.5×32.5, positioned in equilateral triangle.
2)3 different fin space of 4.5, 6.0, 9.0mm for customer's choice to meet different temperature requirement of the room.
3)Extemal rotor fan for low temperature, with low noise, high efficiency, and reliability.
4) Electric heater evenly placed in the coil with good defrosting effect.
5)Shell made of Steel Plate, easy to be assembled and disassembled.
6)Drainage receivers, avoiding water freezing.
7)Fan motor and electric heater has been connected to the terminal box, continent for wire connection.
8)Optimized coil design resulting evenly refrigerant over the evaporator.
Specification of Evaporator for Cold Room
D L 19/45 3 A
D-Products Series Code
L-Temperature(L:-5°C~5°C;D:-15°C~-20°C;J:Below -25°C)
19-Nominal heat exchange
45-Fan Diameter
3-Fan Quantity
A-380V/3P/50HZ;B:220V/1P/50HZ;C:220V/3P/60HZ;D:220V/1P/60HZ;E:110V/1P/60HZ(D,E Fan Diameter≤500mm)
DL Type Evaporator: for around 0°C Cold Rooms
DL Series(Fin Distance:4.5mm;Temp.:-5°C~5°C)
Evaporator for Cold Room products FACTORY, WAREHOUSES AND PRODUCTION PROCESSING:
Finished Evaporator for Cold Room:
Evaporator for Cold Room Processing: