palm fresh fruit oil machinery

palm oil production equipment

Safety:

1. we using auto welding machine to make the reactor,which can guarantee the quality of welding seam,avoid cracking and has a long life for about 8 years.

2. professional heating treatment and x-ray detection chamber for welding seam . 

3. vacuum system to prevent oil gas be back to reactor causing accident.

4. with professional thermometer , profession pressure gauge and safety valve.

Environment friendly:
1.de-dusting system to prevent gas and dust from coal burning 

2.the exhaust gas will be recycled for heating reactor ,no gas pollution

3.well sealing on every junction parts to prevent gas leak,no smelly

Longer life :
 Using Q345R special steel plate ,welding seam with auto welding an will get heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years

Energy saving:
1. well sealing for heating system ,no gas leak and saving fuel. 

2. the exhaust gas will be recycled for reactor heating.

Press section flowchart:

Metering →Cleaning →Magnetic separation→Destoner→Crushing →Softening →Flaking →Cooking →Pre-pressing →go to extraction section

↓

Second oil press

Palm kernel extraction oil machine introduction:

1. Cleaning device:remove the raw material peanut in various impurities, such as: iron,

stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.

2.Crushing machine: peanut is crushed into 6-8 pieces. In order to meet the requirements

of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.

3. Softening process:the purpose of softening is to adjust the moisture and temperature

of oil, and make it soft.

4.Flaking process: rolling raw material into flakes, and the purpose is to increae surface

area, destroy the peanut cell tissue, shorten the way of oil out from cake.

5.Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the

requirement of oil press.

6.Pre-press: press the flakes to leave about 16%-18% in the cake. The cake will go to extraction

process.

7.Second oil oress: Press the cake till the oil residue is about 5%.

Palm kernel extraction oil machine consumption in operation:

Customer visit:

If you are interested in our  Machine ,please kindly contact us with your required daily capacity, treated quantity, raw material and related data, then we would suggest suitable production line and make flowchart for you as your requirement.