1.Microprocessor based servo controlled temperature system

2.Temperature displayed by LED

3.Alarms functions : Power failure; over temperature; temperature deviation; temperature sensor failure;fan failure;

4.>37°C temperature setting

5.A keypad lock prevent inadvertent changes the setting

6.Humidity is adjustable continuously

7.Heating power displayed on panel

8.A second thermal cut-off function for more safety

9.The infant bed inclination angle is adjustable

10.Trough for pulling and pushing ,which is convenient to add the water and wash 

11.Fan with low noise and long life-span

12.Temperature deviation and over temperature could be amended in front panel directly

13.Silence/reset button for alarms

14.six operating windows,two side operating windows can be swiveled

15.Heater is electrically cut-out if air temperature inside incubator exceed 40°C

16.Cabinet with three drawers

17. Phototherapy up side unit;

Phototherapy up side unit;

Phototherapy from up and down sides;

RS232(485)conncector; Tray/pole;

Infant bed pulled from side door; 

Infant bed pulled from side and front door;

Double wall hood

1.Power supply : AC 110/220V  60/50Hz

2.Power input :  ≤420VA

Operating conditions:

1.Environment temperature: 20°C~30°C

2.Environment relative humidity: 30%~75%RH

3.Environment air velocity of flow: <0.3m/s

4.Air Temperature control range: 25°C~38°C

5.Temperature fluctuation: +/-0.5°C

6.Uniformity of mattress temperature: ≤0.8°C

7.Humidity accuracy: ≤10%RH

8.Warm-up time: ≤45min

9.Internal noise level: ≤55dB

10.Infant bed tilt angle : +10º

11.Mattress size: 65cm(L)×37cm(W)

12.Trough capacity: 1200ml

13.Air filter:0.5um

Environment Temp:-10°C--+70°C

Environment Relative Humidity: ≤80%

Atmospheric Pressure: 500~1060Hpa