3M 7093 particulate filter, P100 filter

For use only with 3M. 5000 Series, 6000 Series and 7000 Series half and full facepiece
respirators according to the NIOSH approval label.

The 3M 7093 P100 is a HEPA filter sold by the pair for use on the 6000 and 7500 series masks. It has a hard plastic case that makes it especially useful when sparks from welding or grinding might damage the 2000 series filters. Also helpful where some water splash may occur, such as in asbestos abatement. As compared to the 3M 2091 filter, you may also notice that the filter media is contained within the case. This keeps the trapped lead or asbestos dust particles out of reach.

The 3M 7093 P100 Particulate Filter provides up to 25% improvement in breathing resistance. The filter has a low-profile design for increased field of vision. Innovative solid-top air-inlet design requires no tape during showering or decontamination and protects and increases the service life of the filter. This filter is widely used in the asbestos abatement industry.

3M 7093 P100 is a HEPA filter

Features:

1. NIOSH approved for environments containing certain oil and non-oil based particles

2.  Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series

3. concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces

1. including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA

2. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).

Specifications