CO2 laser tube for cutting and engraving 40W-400W                                                   

Puri laser stronger power

Part 1, Advantage for our laser tube: Puri Laser Tube/Power product

    Carbon dioxide co2 laser tube and laser power supply, located in located in Shanghai Pudong New District. Combining the support of Shanghai laser instrument Institute, and Shanghai Aoshi Industry and Trade Co., Ltd. of years of research and development and production experience, we has over 10 years of experience in co2 laser tube. The present Puri Laser can produce 25W, 40W, 50W, 60W, 80W, 130W, 160W, 200W, 300W CO2 co2 laser tube, at the same time to produce the perfect 25W ~ 300W laser power 
    Puri Laser tube is using a special process, from the co2 laser tube firing patch inflatable process of scientific and comprehensive quality control methods which enables Puri co2 laser tube have power spot.......

laser engraving machine CO2 laser tube

Part 2   laser engraving machine CO2 laser tube Technical parameter

Laser type:  CO2 laser tube

Laser-wavelength:10600nm

Laser power:   30-350W

Working area: According to machine working size

Engraving speed     ≤1200mms

Cutting speed: 0-4000mm/min

Repeat accuracy     ≤0.01mm

Location precision  <0.01mm

Shooting mode:      CCD camera

Control system:      QC controlling units

Working table: Thicker honeycomb working table/ Triangular aluminum working table for your reference

Graphic format:      HPGLPLTBMPJPEGTIFFTGADSTDXPDXFDWGCOK

Power supply: 220V/50HZ+-10%

whole power   <1250W

Cooling system:      air-cooling and protection system

Auxiliary equipments:     Exhaust-fans, air-exhaust pipe and so on

Machine dimension:       According to different model

 Puri laser tube for laser engraving machine CO2 laser tube

laser tube  

Shanghai Puri CO2 laser tube, above 300W, is mainly applicable in die cutter, thick plexiglass, sheet steel, etc., as well as some domestic laser cutting machine; Puri laser tube with mid-level power is excellent in good laser spot mode, enough power, long life, etc...

Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.

Laser Wave Length: 10.6um.

Laser Mode:low order mode.

Water-Cooling:purified water, appropriate temperature 10-35°C. 

Working Environment:temperature 5-35°C, humidity 10-60%, clean environment, no serious pollution.

Working Current:35~45mA is appropriate (excessive current will affect laser power and laser tube lifetime.

Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.

Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation. )
Laser State:
     1, There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
     2,On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.

Welcome to visiting our factory

 Laser tube agent wanted.

Hope our good quality ,competitive price and comprehensive service will help you expand marketing successful.