A6C Kelly Spinner
USD $1,000 - $20,000 /Set
Min.Order:1 Set
Goldenman Petroleum Equipment Co., Limited
KELLY SPINNER
1.A6C Kelly Spinner is used to connect single pipe by matching with mouse hole clamping device and designed according to API 8A.
2.KS is designed and manufactured under Varco 6600 (Pneumatic Kelly Spinner) and 6800 (Hydraulic Kelly Spinner) designs,
which is used for rotating drill pipe slowly, for limited rathole and mousehole drilling, and for making fast Kelly connections. This unit is completely reversible, the driller can spin out, as well as spin in, and when making connections, therefore, spinning chains are not required any more.
Model | FXD | QF2 | Q3 | A6C | 6600 | 6800 | ||||
Drive mode | Pneumatic Driven | Hydraulic Driven | ||||||||
Max. static load | 2250kN | 2250kN | ||||||||
Pressure | MPa | 0.5-0.9 | 0.5-0.9 | 0.5-0.9 | 13.8 | |||||
Psi | 72-130 | 72-130 | 72-130 | 2000 | ||||||
Brake torque | Nm | 1200 | 1600 | 1650 | 1500 | 1500 | 1650 | |||
ft.ibf | 885 | 1180 | 1215 | 1100 | 1100 | 1215 | ||||
Idle speed | rpm | 76 | 72 | 72 | 170 | 130 | 110 | |||
Rotating direction | Single | Double | Double | Double | ||||||
consumption/flow | m3/min | 9.3 | 20 | 20 | 9.3 m3/min | 15 m3/min | 91 LPM | |||
ft3/min | 328 | 706 | 706 | 328 ft3/min | 529 ft3/min | 24 GPM | ||||
Stem connection | 6-5/8 REG LH | 6-5/8 REG LH | ||||||||
Size | mm | 845*740*725 | 558*558*935 | 860*725*980 | 768*768*1225 | 740*710*978 | 740*710*978 | |||
in | 33*29*28 | 22*22*37 | 34*28*39 | 30*30*48 | 29*28*38.5 | 29*28*38.5 | ||||
Weight | Kg | 383 | 450 | 520 | 540 | 500 | 504 | |||
lb | 844 | 992 | 1146 | 1190 | 1100 | 1110 |