Specifications

The characteristic of UHMWPE pipes
1.Wear Resistance
2.Water hammer resistance
3.Corrosive resistance
4.Fuel Saving

CHARACTERISTIC OF UHMWPE PIPES

Wear Resistance:the abrasion value of UHMWPE pipe is 1/4 of steel pipe,1/3 of HDPE pipe under same working condition.

 

Impact resistance:UHMWPE pipes have strong enduring capability to the impacts from various sands,mud and slurries.

 

Corrosive resistance:With higher structure stability ,UHMWPE pipes are corrosive resistant to sea waters.No electro chemical corrosion,no need anti-corrosive coating.

 

Self-lubrication:The roughness of UHMWPE pipe is 0.00022mm.The pressure loss of UHMWPE pipe is 1/10 of steel pipes ,1/7 of nylon pipes.Over 20% of transfer efficiency will be increased.

 

Non-scaling:The internal wall is very smooth,preventing the fouling on the wall and no influence to the production efficiency.

 

Light weight:The density of UHMWPE pipe is only 1/8 of steel pipe.It is easy to move and install,especially suitable for the working sites at he lifting machines could not work.

 

Easy connection:flanges are available to connect the pipes,no need washers .The installation will be very easy and fast.

 

Anti-aging:the UHMWPE pipes will not be aging in 50 years under hot sunlight,and it could work over 100 years if buried underground.

 

Environment friendly: UHMWPE pipe is nontoxic,no bacteria,and no pollution to environment.

 

Low carbon:the discharge of carbon dioxide during UHMWPE pipe production is only 15% of steel pipe production.

.

O.D. DN(mm)	0.4MPa	0.6MPa	0.8MPa	1MPa	1.25MPa	1.65MPa	2.0MPa
	Thickness mm	Thickness mm	Thickness mm	Thickness mm	Thickness mm	Thickness mm	Thickness mm
110			4.7	6.0	7.4	9.2	11.4
125			5.4	6.7	8.3	10.3	12.7
140			6.0	7.7	9.5	11.8	14.6
160		5.2	6.9	8.6	10.7	13.3	16.4
180		5.9	7.7	9.6	11.9	14.7	18.2
219		6.5	8.6	10.8	13.4	16.6	20.5
225	4.9	7.3	9.7	11.9	14.8	18.4	22.7
250	5.5	8.1	10.7	13.4	16.6	20.6	25.4
280	6.2	9.1	12.0	15.0	18.7	23.2	28.6
315	6.9	10.2	13.5	16.9	21.1	26.1	32.2
350	7.8	11.5	15.3	19.1	23.7	29.4	36.3
400	8.8	13.0	17.2	21.5	26.7	33.1	40.9
450	9.8	14.6	19.1	13.9	29.7	36.8
500	11.0	16.2	21.4	26.7	33.2	41.2
560	12.3	18.2	24.1	30.0	37.4
630	13.8	20.5	27.2	33.9	42.1
700	15.3	22.7	30.6	38.1
800	18.0	26.0	38.1
900	20.0	30.0	42.1
1000	22.0	33.0