Product Details

Specifications

The characteristic of UHMWPE mine tailing pipe supplier
1.Anti-abrasion
2.Anti High-pressure
3.From Lubrication
4.Non-scalin

The Detailed characteristics of UHMW PE mine tailing pipe supplier

Anti-abrasion: Under the same instance, the bulk lost is only the 1/7 of steel piper .

Anti High-pressure:It is applicable under the press 0.2Mpa-4.0Mpa.

Anti-corrosion:Because the solid structure,it can anti-corrosion very well.

From Lubrication:The abrasion is the least among all the pipes materials .Under the same stance,the press lost is only the steel pipes1/10,and is only the nylon 1/7.

Non-scaling:The internal wall is so slippery that the medium cant deposit on it..

Light Weight:The density is the 1/8 of the steel.it's easy to convey and install.

Available to connection: It's welded by flange or hoop. And it's convey and install.

Anti-aging: There is anti-ultraviolet radiation material in the pipes, May use above for 50 years under the burning hot sunlight.

Health&Safety:This kind of pipe is innocuity.

Temperature-resistance:The pipe can be used from -70oC to 85oC.

Long life: Under the same instance, the used life is 7 times of the steel pipes .

Performance comparison of UHMW-PE with other materials

Item	Experimental methods	Units	UHMWPE	PA66	PVC	PE	Steel Pipe
Average molecular weight	GB1841		1.5×106			5×105
Density	GB1033	G/Cm3	0.935	1.13-1.15	1.4	0.945	7.8
Water absorption	ASTMD-570	%	0.01	3.8	0.07-0.4	0.01
Melting Point	ISO11357.3		136	255	160	129
Heat distortion temperature0.46MPa	GB1634		85	182-224	54-73	71
Linear expansion coefficient	ASTMD-696	10-4/	1.5	0.8		1.2
Tensile strength	GB/T1040	MPa	39.2	61	40	25
Tensile yield stress	GB/T1040	MPa	22			20
Tensile elongation at break	GB/T1040	%	≥350	60-300	60-120	≥350
The impact on the Gap of simply supported beam	GB/T1043	KJ/m	Continuously	5.9-10.8	10	27
Rockwell hardness	GB/T9342		40	85-120		33
Friction coefficient	Three petrochemical Law		0.05-0.11	0.37	0.4-0.6	0.4	0.58
Wear rate	Three petrochemical Law	%	21	100	210	210	140
Scaling			Non- scaling				Scaling
Corrosion-resistant			Merit	Average	Average	Average	Average