stopping angle &corner bead
1)The stopping angles have a perforated,recessed edge and are used where the edge of the building board is not exposed and where the fitting of a stopping bead would be difficult.
2)The stopping angle is fixed to the sheet of building board with an adhesive or staples,with the finishing coats bonding into the building board and feathering up to the bead nib.ldeal for use around door jambs,however,in this application it is recommended that when using building board up to 10mm thick,a P26 should be used so that the leg will slot into the door jamb.similarly,when using 13mm board,P27 should be used.SIZE:P25 10mm leg; P26 13mm.
stopping angle &corner bead
Standard in Australia,
Angle accord with fast installation,
Galvanized 50-275g,
Size30*6,
30*10,
30*13
30*16
Thickness:0.3-0.5mm
PART NO | DESCRIPTION | Size(mm) | Length(mm) |
| Leg Stopping Angle 6mm | 30*6*0.4 | 3000 |
P25- L shape | Leg Stopping Angle 10mm | 30*10*0.4 | 3000 |
P26- L shape | Leg Stopping Angle 13mm | 30*13*0.4 | 3000 |
P27- L shape | Leg Stopping Angle 16mm | 30*16*0.4 | 3000 |
P01- L shape | External Angle 90 | 30*30*0.4 | 2400/2700/3000/3600 |
P50- Z shape | Shadowline stopping angle | 10*10*30*0.4 | 3000 |
packaging:paper box,50-100pcs/box