Specifications

Rivet Nut Hand Tool/Rivet Nut Gun
1 Rivet nut gun
2 Working stroke: 10m/m
3 Sphere of application: M8~M12 riveting nut

Rivet Nut Hand Tool/Rivet Nut Gun

Main parameter:

 

1 Working stroke: 10m/m

2 Pull: 6860N(on the assumption that the force on the end of the handle is 490N)

3 Sphere of application: M8~M12 riveting nut

4 Outline size: 530×180×40 m/m

 

How to use:

 

1. To replace the gun head and the riveting bolt: select the suitable gun head and riveting bolt according to the size of riveting nut. Loosen the adjusting nut and screw off the gun head sleeve, and place the selected gun head and riveting bolt on the gun head sleeve and pulling rod, and then screw down.  and part 18 was inserted with the column pin. And then screw the gun head sleeve  in connection with the adjusting nut  and gun head into the hole of gun body.
2. To adjust the length of the riveting bolt: open the two handles , adjust the gun head sleeve to the place where the length of exposed riveting bolt is slightly longer than the riveting nut. At last screw down the adjusting nut with the gun body.
3. Operation: open the two handles and pull out the Bakelite ball whole, cover the relevant riveting nut on the end of the riveting bolt and clench it, boost the Bakelite ball and riveting nut to make it possible to screw on the gun head bolt. And then insert the riveting nut into the fore-drilled hole of the work-piece and then close the two handles with force, and by now the riveting gun will expand to clinch the work-piece. Then pull out the bakelite ball and the riveting bolt quits back from the threaded hole.
4. The index ring is used to adjust the riveting journey according to what you need in operation.
5. Note: During operation, if the screw cap is loose, please screw down it at any moment.

Specification

pictures

other hand tools photo

Welcome to visit our website to see more products information and welcome your inquiry.