Specifications

Crusher is used to process the materials whose particle sizes are not more than 500mm with compressive strength more than 350Mpa

PF Series of Impact Hammer Crusher  is used to process the materials whose particle sizes are not more than 500mm with compressive strength more than 350 Mpa. (granite, limestone, basalt, etc). The kinds of prodcuts have feature of big crushing ratio, highly efficient energy-saving, easy maintenance and so on. This series products are cube & the output size is adjustable that It’s widely used in electricity, water, highways, railways, artificial aggregate, construction and other industries.

Working principle: The motor drives the by rotor into high-speed rotating,When materials enter,the hammer in the rotor beaks them. And then they will be breaken again in the lining, discharged from the entrance and exit finaly.

 

Main technical parameters

 

Model	Size mm	Feed   opening mm	Max.   feed size mm	Capacity t/h	Motor   Power kw	Weight(excluding electric motor)t
PF-0607	644x740	320x770	100	15-25	30	4
PF-0807	850x700	400x730	300	25-35	30-45	8.13
PF-1007	1000x700	400x730	300/600	37-45	30-55	9.5
PF-1010	1000x1050	400x1080	350/600	50-80	55-75	13.2
PF-1013	1000x1300	650x1350	400/600	80-120	90-110	12
PF-1210	1250x1050	400x1080	350/600	70-120	110-132	15.2
PF-1214	1250x1400	400x1080	350/600	130-180	132-160	20
PF-1310	1300x1050	490x1170	400/650	70-120	110-160	13.5
PF-1315	1320x1500	860x1520	500/650	150-220	180-220	20.5
PF-1320	1320x2000	860x1520	500/650	160-250	180-260	19
PF-1515	1500x1500	850x1580	550/700	220-280	280-315	29.5