Product Details

cement clinker grinding machinery / cement grinding station / industrial machinery for cement grinding plant

Project introduction for cement grinding station for sale

1.1 Building scale:600tpd-10000tpd cement grinding station for every type of ordinary Portland cement,this proposal is for 30% bagged cement and 70% bulky cement,the cement bagged packing and bulky packing can be adjusted as per requirements;

1.2 Construction scale:one complete cement grinding station from every kinds of raw material inlet to the cement packing;

1.3 Production proposal

The project produce 600 -10000 ton per day for Portland anwhile,to make sure the production of variety kinds of the cement,there leave one proper room for the standby mixed material at raw material pre-blending storage hall and cement dosing silo.the blending ratio is as following:

cement type	Clinker (%)	Gypsum(%)	slag(%)	Total (%)
Portland cement	85.00	5.00	10.00	100.00

Available range of cement production plant for sale

Design (The owner should provide design date like geological exploration report etc. )

Mechanical equipment

Gypsum crushing, storing and conveying

Mixture drying and conveying

Clinker blending and conveying

Cement grinding and conveying

Cement storing and conveying

Cement packing, bulk and finished product silo

Air compressor station

Laboratory equipment

Electric equipment

(not including wire and cable, not including distribution room)

Installation

Non-standard part

Civil engineering

Technical parameters of cement ball mill used for cement grinding station:

Specification (D×L)	Rotary speed (r/min)	Feed size(mm)	capacity (t/h)	Loading capacity of grinding medium (t)	Main motor			Main reducer		weight (t)
Specification (D×L)	Rotary speed (r/min)	Feed size(mm)	capacity (t/h)	Loading capacity of grinding medium (t)	Model	Power (kw)	Rotary speed (r.p.m)	Model	Speed ratio	weight (t)
φ2.2×11	20.91	≤25	15~17	50	TR1512-8	570	740	Zd80	5.6	92
φ2.4×8	20.91	≤25	14~18	39.5~42	TRQ1512-8	570	740	Zd80-9	5	76.4
φ2.4×9	20.91	≤25	closed 23~25	50	TR1512-8	570	740	Zd80-9	5	91
φ2.4×10	20.91	≤25	16~22	50	TR1512-8	570	740	Zd80-9	5	111
φ2.4×11	21	≤25	open 19~24 closed 22~28	62-65	YR710-8/1180	710	740	JDX630	5.6	125
φ2.4×12	21	≤25	open18~20 closed21~23	63-65	YR800-8/1180	800	740	MBY710	6.3	127
φ2.4×13	21	≤25	open21~22 closed24~26	66-68	YR800-8/1180	800	740	MBY710	6.3	131
φ2.6×10	20.6	≤25	21~24	64	YR800-8/1180	800	740	JDX710	6.3	140
φ2.6×13	20.6	≤25	28~31	81	YR1000-8/1180	1000	740	JDX800	6.3	158
φ3.0×9	19.13	≤25	35~40	85	YR1000-8/1180	1000	740	MBY800	7.1	148
φ3×11	18.92	≤25	44~47	95	YR1250-8/1430	1250	740	JDX900	7.1	177
φ3×12	18.92	≤25	48~52	103	YR1250-8/1430	1250	740	JDX900	7.1	182
φ3×13	18.92	≤25	39~45	116max	YR1400-8/1430	1400	740	JDX900	7.1	200.7
φ3.2×11	18.3	≤25	45~48	112max	YR1600-8/1430	1400	740	JDX900	7.15	213.6
φ3.2×13	18.7	≤25	50~55	133max	YR1600-8/1430	1600	740	JDX1000	7.15	237
φ3.4×11	18	≤25	45~55	120max	YR1600-8/1430	1600	740	JDX1000		230
φ3.5×13	17	≤25	50~55	156max	YR2000-8/1730	2000	740	TS130-A-F1		240.5
φ3.8×13 (main bearing type)	17	≤25	65~70	190	YR2500-8/1730	2500	740	JS130-C-F1		240
φ3.8×13 (side sliding shoe type)	17	≤25	65~70	185	YR2500-8/1730	2500	740	DMG22/2500		220
φ4×13	16.3	≤25	78~80	191	YRKK900-80	2800	745	JS140-A		220
φ4.2×11 (main bearing type)	15.8	≤25	120~140	182~190	YR2800-8/17830	2800	740	JS140-A-F1D		245
φ4.2×13 (main bearing type)	15.2	≤25	140~155	230	YRKK1000-8	3350	740	MFY355-A		260
φ4.2×13 (main bearing type)	15.2	≤25	140~155	245	YRKK1000-8	3350	740	MFY355-A		260
φ4.2×13 (center sliding shoe type)	15.2	≤25	140~155	230	YRKK1000-8	3350	740	MFY355-A		280
φ4.6×14	14.5	≤25	140	285	YR1000-8	4200	995	J3160-C		372
Φ5.0×15	14	≤25	160-165	350	YR1000-8	6000	740			420

Production Site of small scale cement clinker grinding plant for sale