Product Description

remote controller (remote master) for copy kinds of wireless RF remote controller!

It?s suitable for key &lock shop, locksmith,and car service shop!

Functions:

1. Frequency indicate (100MHz-1000MHz)

2. Data Detect

3. Duplicate Fixed code remote

4. Duplicate part of Rolling code remote

5. Duplicate part of original car keys

6. Regenerate new remote control

7. Chinese/English bilingual support

Package List:

1pc x Digital Counter

2pc x Red Wires

1pc x Screw Stick

1pc x AC Adapter

Remote master user manual
The remote master used to copy RC,working with remote control A,B,C 3styles submachines.The use method as belows.

1. 4 copy styles as below Turn on the power,press button "5" for 2 times,interface shows "remot copy"; 1).press button"5" for1 time,shows "1.normal copy"; 2).then press button"3" for 1 time,shows "2.Singkey copy"; 3).continue to pressbutton"3" for1 time,shows "3.MulFreq copy"; 4).repeat last step,shows "4.same SYS copy";
2."normal copy"
Turn on the power,press button"5" for 2 times,interface shows "remot copy"; 1)press button "5" for more1 time,shows "1.normal copy"; When the interface shows"1.normal copy",then action as below 2).press button"5 " for1 time,shows "input 1key to",then press the first key of original remote for1 time,the machine sounds "bee" a time,enter into code reading;then press button"5" for 1 time,shows "input 2key to", then press the second key of original remote.Action as this to read all keys one by one; 3).When finished original remote code reading,press button "5" for 2times,shows "input No.1 remote",means insert our new RC(remote control)A,press button "5" for 1 time,then write the code infomation into new remote; 4).Adjust frequency:back to interface"remot copy",press button "4" for 1time to test frequency:put the original remote on the machine and press any key for 1time,shows the frequency.Then put the new RC A on the machine,press key1 one time,use the non-inductive regulator action on the white capacitance to adjust frequency fit. 5).after adjust frequency,press button "1" and button "2" at the same time(if the remote has 5keys, just need to press the 5th key one time),the light flash 1time.When you press any key there is the light,means copy successfully finished.
3.other copy method,pls action as the indication in the machine.