Specifications
extrusion blow molding machinecontainer capacity:5ML-2L
Single station
food containers, toys, balls, juice bottle ...
ZK-55S Model full automatic extrusion blow molding machine---is single station machine, this machine can have from 1 to 4 heads to meet the demand of different output and different product size for customer. This model is full-automatic process with low noise, saving energy ,high efficiency, safe operation, easy maintenance and other benefits. This model is widely used to produce bottles of wine, pesticide, detergent, cosmetic, medicine, auto oil and other hollow products, such as food containers, toys, balls, juice bottle, chemical barrel, water jug, etc. This model can produce max 2L product.
Technical Parameter
Model | ZK-55S | |
Station number | Single station | |
Screw diameter | 55mm | |
Max. product volume | 2L | |
Output(dry cycle) | 1000 pc/h | |
Suitable material | PEPPPA... | |
Screw L/D ratio | 24(L/D) | |
Screw motor power | 7.5KW | |
Screw heating power | 6.0KW | |
Number of screw heating zone | 3 zone | |
Plasticising capacity | 50 kg/h | |
Oil pump motor power | 5.5KW | |
Clamping force | 38 KN | |
Stroke of mould board | 130370mm | |
Number of moulds | 1 set | |
Max mould size(W*H) | 350370/205600mm | |
Number of die | 1234 | |
Max die pin diameter of single die | 75mm | |
Heating power of single die | 4.2KW | |
Heating zone number of single die | 3 zone | |
Center distance fo double die | 130mm | |
Max die pin diameter of double die | 75mm | |
Heating zone number of double die | 3 zone | |
Heating power of double die | 8.4KW | |
Blowing pressure | 0.6Mpa | |
Air consumption | 0.4m3/min | |
Average consumption | 15KW | |
Electric Power : | 3phase,220/380V,50/60Hz(can be made to order) | |
Overall size(LWH) | 2.72.02.5m | |
Weight of machine | 30T | |
Basic features | Clamping system | single station+high-precision guide+large arm cylinder axle |
Extrusion system | Hard gear surface reducer+import inverter | |
Die system | Central-incoming extrusion die with special steel | |
Hydraulic system | Import hydraulic valve and seal+proportional control | |
Control system | Japan PLC+import touch panel+PLC automatic temperature control model+import electronic parts | |
Note: the technical data is not binding and may change without notice. | ||
