Specifications

plastic extrusion blowing molding machine ZK-90B
can make barrel,automobile pipe,jerrycan,seat etc
capacity:60L
screw:90mm

 plastic blowing molding machine(extrusion blow molding machine) ZK-90B

1.This series is mainly applicable to the production of various packing barrels with PE and PP material and capacity between 10-60L. toolbox,motorcar parts such as gasoline bank, wind pipe and other large and medium-sized plastic hollow products.

2.This series adopts new patent of two pull-rod type closing-mold device;double-folding accumulator head;extrusion device,equipped with complete blowing device and product taking-outdevice,and entirely achieves full automatic production.

3.The electrical control system adopts Complete computer control to automatically conduct technical parameter optimization and trouble diagnosis with high control precision and good reliability.

4.This series,completely designed and manufactured according to German standards of same model is the model with ration of performance to price at present.

  following is the technical specifications:

specification	unit	zk-90A	zk-90B
max container capacity	L	50	60
number of die heads	set	1	1
machine dimension(L*W*H)	M	5*3.1*3.2	5*3.1*3.9
total weight	ton	7	9
clamping unit
clamping force	KN	300	300
platen opening stroke	mm	350-1050	350-1050
max mould size(W*H)	mm	700*1000	700*1000
mould thickness	mm	360-500	360-500
power
max drive	KW	11	11
total power	KW	63	70
fan power for screw	KW	0.72	0.72
air pressure	Mpa	0.7	0.7
air consumption	m3/min	0.9	0.9
average energy consumption	KW	28	35
extruder unit
screw diameter	mm	90	90
screw L/D ratio	L/D	25:1	25:1
plasticizing capacity	kg/hr	100	120
number of heating zone	zone	5	4
extruder heating power	KW	12.5	12.5
extruder driving power	KW	22	30
accumulator head
number of heating zone	zone	3	5
power of die heating	KW	7	20
max die-pin diameter	mm	350	350
accumulator volume	L	5	6