Specifications

Hedeg Trimmer
1.Certificate:CE
2.Engine model:1E32F
3.Power:0.81kw/7500rpm
4.Engine type:2-stroke,aircooled,single-cylinder

22.5CC  Double Handle Hedge Trimmer

Engine model:1E32F

Engine power :0.81kw/7500rpm

Engine displacement :22.5cc

Engine type:air-cooled, 2-stroke ,single-cylinder

Ignition:CDI

Carburetor : Diaphragm 

Blade Length :650mm

Blade:Double side blade

Fuel tank capacity : 600ml

Fuel ratio: 25:1

Packing siae:1080x230x230mm

 

 

Advantage     

Low noise and Small Vibration    
Big power output, small oil consumption

Big Fuel tan capacity and long operating time

Few exhaust gas discharge and Low noise pollution

Use of attention to matters of the fuel
1. The hedge trimmer initiated the use of fuel oil and gasoline mixed with oil, and is flammable. Please do not be able to fire the local refueling or storage of fuel in the combustion furnace, burning, stoves, etc. 2. Homework or when refueling Do not smoke. 3. There is no fuel in the use of the process, the inevitable first will be launched to stop to confirm the four weeks without cooking fire after refueling. 4. Machine such as fuel when refueling touch spilled fuel bound to want the body attached wipe clean before they start to initiate. 5 Fuel after container sealing, and then to separate fuel container 3 m above the local startup launched the machine.
Attention to matters before the task
1. Before beginning homework, first to ascertain the situation of the site (topography, the nature of the hedges, the status of obstruction around the degree of risk, etc.), eliminate the obstruction can move. 2. Homework by the mid-risk areas within a radius of 15 meters, to prevent others entering the area to be roped off or erected a wooden plaque to show the warn. , Few also homework, or from time to time with each other to play to entertain and to adhere to the inevitable peace spacing. 3. Before the beginning of the lesson, we should carefully reflect on the body ministries confirm the screws loose, oil spills, damage or deformation of the status before beginning homework. Special blade and blade convergence site more careful reflection. 4. Confirm there is no blade chipping, cracks, bending before use. Definitely not to use has rendered the exception of the blade. 5 Please use the grind a sharp blade. 6. Grinders, in order to avoid the blade crack the inevitable should the tooth root file into the arc. 7. Tighten the screws Shanghao blade, the first change blades by hand to reflect on whether bobbing or abnormal noise. If bobbing up and down, can give rise to a loosening of the abnormal vibration or blade fixed partial.