TY-863F Plastic Grinder is used for plastic rollers or plastic rings, which are for Foam Plastic, Wool spinning, Cotton Spinning, Spinning, and Chemical Fiber.

2,Structure of machine

Machine Body, Rail, Stand for grinder, head, rear stand, transmission, controlling box, dust absorption, etc.

3,Main Specifications

3- 1 Head

(1)Max Cutting Length   460mm

(2)Max Cutting diameter: 130mm

(3)Rotation speed of cutting head: 290rpm

(4)Height of Center: 140mm

(5)Scope of rotation: 0-30°

(6)Type of Motor: 0.35KW(FW12-4)

3-2  Rear Stand

(1)Max running distance: 18mm

(2)Height of Center: 140mm

3-3,Stand for Grinder

(1)Rotation Speed of Grinder: 1810rpm

(2) Specifications of Grinder: TL80R2A/P300×25×75

                                          Ceramic bond, green silicon pore,  grinding wheel

(3)Line Speed of Grinder: 28m/s

(4)Supply Space: 0.01/Space

(5)Type of Motor: 1.1KW(Y90S-4)

3-4,working plat form

(1)Max Return distance: 460mm (could be adjusted as requirements)

(2)Speed: 650mm/m

3-5,dust absorption:

(1)Diameter for Blades: 290mm

(2)Wind capacity: 760 m³/hour

(3)Dust Clear: 99%

(4)Type of Model:  0.75KW(Y90S-4)

(5)Diameter of sucking pipe: 85mm

4,maintain, and adjusting.

4-1,If chief axis of the head loosen, we could fasten the nuts of lacking for the bearings, it should have a certain space, could run smoothly, no heating, please check spring of rear stand, to be sure the spring could press the materials tightly, or the materials could fly away.

4-2,If the conical shape is not right, please adjust the screw on the back.

4-3,If cutting head or rear stand loosen, please rotate the fasten parts and screw.

4-4,Please check the grinder frequently, it should be no fissure, no loosen, and no welds loosen for protection cover. Or the grinder will broke when working.

4-5,The box of controlling should have earth wire.

5,operation

5-1,Fasten the rear stand on the place where the working materials needs.

5-2,Place working material, and fasten it.

5-3,Adjust the stop place for stopping cube.

5-4,Start cutting head and dust absorption machine

5-5,Start cutting head motor, hand rotating to send the grinder for first cutting.

5-6,Start auto running on the plat form, after reach the size of working materials, quit the grinder.

5-7,Stop the operation on the plat form, and stop the general switch.

5-8,Clear dust, change working material.

6,ools together with machine

6-1,Spanner        14-17-19 1 pieces each

6-2,Inner hexagon spanner 6-8# 1 pieces each

6-3,Spanner for push spot   19 open spanner, 1 pieces

6-4,Stand for Grinder           not include Cutter, 1 pieces