Specifications

Super Speed USB3.0 Cable with USB A Male to USB B Male

Super Speed USB3.0 Cable with USB A Male to USB B Male   

Electrical:

 

100% open & short test

Hi-Pot: DC 300V 10ms

Insulation Resistance: 10M OHM /300V Min.

Contact Resistance: 0.01 OHM Max.

Shield up to  65% braid.

Working Temperature: -25°C ~ +85°C

 

Mechanical:

 

Over mold: PVC 70Pa UL94V-0 Black

Pre mold: PE Low Density

Contact: Copper Alloy.

Insertion Force: 35 N Max.

Withdraw Force: 10 N Min

 

Application:

 

High-resolution web camera, video monitor, video display, digital cameras, digital Blu-ray video cameras and other modern electronic devices.

 

USB3.0 Technology

 

The connector interface will have backwards compatibility with USB2.0

Superspeed protocols are supported via 4 extra wires for dedicated superspeed transfers.

The additional wires is crearly wisible as four additional pins on the connectors.

 

Maximum bus power is in creased to 150 Ma per unit lod (+50% over USB2.0) A configured device can draw up to 6 unit loads (900Ma, 80% over USB2.0) Minimum device operating ge is dropped from 4.4V to 4V.

 

Estimated cables will be limited to 3 m at full speed.

The technology is similar to PCI Express2.0(5 Gbit/s) It uses 8 B10B encoding,linear feedback shift register (LFSR) scrambling for data, spread spectrum.