Product Details

quality guarantee ac to dc 110v/220v 48v 30a switching power supply 1500w 5v 12v 15v 24v 48v high power source

OEM welcome

Product Description

Low price and high reliability

105Celsius degree output capacitor

Universal AC input

High efficiency and low operation temperature

Soft-start current can reduce the AC input impact effectively

With short-circuit and overload protection

Compact size,light weight

100% full-load burn-in test

Install with EMI filter,minimum wave

Model&Specification	S-1500-5	S-1500-12	S-1500-15	S-1500-24	S-1500-48
DC Output voltage	5V	12V	15V	24V	48V
Output voltage range(Note:2)	±2%	±1%	±1%	±1%	±1%
Rated output current	220A	125A	100A	62.5A	31A
Output current range	0~220A	0~125A	0~100A	0~62.5A	0~31A
Wave and noise(Note:3)	100mVp-p	120mVp-p	150mVp-p	240mVp-p	480mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	1100W	1500W	1500W	1500W	1488W
Efficiency	77%	83%	85%	85%	87%
Adjustable range for DC voltage	±10%	±10%	±10%	±10%	±10%
AC input voltage range	90~240VAC/ 190~240VAC 47~63Hz, 250~340VDC
Input current	11A/230V
AC Inrush current	Cold-start current 30A/115V 60A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105%-150% Type: cut down output Reset: auto recovery
Over-voltage protection	......................
High-temperature protection	......................
Temperature coefficient	±0.03%/°C(0~50°C)
Setup, rise, hold up time	800ms, 50ms, 10ms/150V 300ms,50ms,80ms/230v
Vibration	10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes
Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve), 20%~90%RH
Store temperature and humidity	-20°C~+85°C, 10%~95%RH
Overall dimension	291132132mm (LWH)
Weight	4.34Kg
Safety standards	UL1012 TUVEN60950(IEC, UL1950)Approved
EMC standards	CISPR22(EN55022), IEC1000—4, 2, 3, 4, 5, 8, 11IEC1000-3-2
Note: 1. The parameter under the testing condition: 230VAC input, rated load, 25°C70% RH. Temperature. 2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5). 3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. 6. C6 must be knocked down.