Product Details

good 600w switching mode power supply smps 24v, 48vdc power supply 48v 12a, 12v 50 amp power supply atx

OEM welcome

Product Description

Low price and high reliability

105Celsius degree output capacitor

Universal AC input

High efficiency and low operation temperature

Soft-start current can reduce the AC input impact effectively

With short-circuit and overload protection

Compact size,light weight

100% full-load burn-in test

Install with EMI filter,minimum wave

Model&Specification	S-600-5	S-600-12	S-600-15	S-600-24	S-600-48
DC Output voltage	5V	12V	15V	24V	48V
Output voltage range(Note:2)	±2%	±1%	±1%	±1%	±1%
Rated output current	80A	50A	40A	25A	12.5A
Output current range	0~80A	0~40A	0~32A	0~20A	0~3.2A
Wave and noise(Note:3)	75mVp-p	120mVp-p	150mVp-p	240mVp-p	240mVp-p
Inlet stability(Note:4)	0.5%	±1%	±1%	±1%	±1%
Load stability(Note:5)	±3%	±1%	±1%	±0.3%	±0.3%
DC output power	400W	480W	480W	480W	500W
Efficiency	78%	82%	84%	85%	86%
Adjustable range for DC voltage	±10%	±10%	±10%	±10%	±10%
AC input voltage range	100~132VAC/190~240VAC 250~340VDC
Input current	5A/230V
AC Inrush current	Cold-start current 30A/115V 60A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105%-150% Type: cut down output Reset: auto recovery
Over-voltage protection	......................
High-temperature protection	......................
Temperature coefficient	±0.03%/°C(0~50°C)
Setup, rise, hold up time	800ms, 50ms, 10ms/150V 300ms,50ms,80ms/230v
Vibration	10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes
Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve), 20%~90%RH
Store temperature and humidity	-20°C~+85°C, 10%~95%RH
Overall dimension	23812465mm (LWH)
Weight	1.5 kg
Safety standards	UL1012 TUVEN60950(IEC, UL1950)Approved
EMC standards	CISPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification
Note: 1. The parameter under the testing condition: 230VAC input, rated load, 25°C70% RH. Temperature. 2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5). 3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. 6. C6 must be knocked down.