Specifications

1.Higher effciency and less space required
2.Stainless steel sector
3.White water filtrated is lower

 ZNP Series Disc type thickener for paper making from waste paper:

 

Disc Thickener is maninly used for the low consistency thickening of the stock

1. Strong Point

Disc Thickener is maninly used for the low consistency stock thickening. The water log installation height is not needed. It can replace traditional gravity cylinder thickener. In the same floor space, the throughout of the gravity disc thickener is serval times more than that of the gravity cylinder thickener, so a lot of space and power can be saved.

 

2. Performance and Working Principle

The pulp at consistency of 0.8-1.2% enters the vat and attached the disc sector, filtrate is guided by hollow shaft and discharged out at two end. Stock attached on sector is knocked off by high-pressure shower. The thickened stock at consistency of 3-4% flow over the plate of adjusting valve and into discharge chamber where it is out feed. The rotation speed of main shaft can be adjusted for required outlet consistency and capacity.

 

3. Strong Point

Thickening of broke or washing of low consistency pulp systems;

Compact design;

Variable speed drive, very low power consumption.

Disc Thickener is maninly used for the low consistency thickening of the stock

1. Strong Point

Disc Thickener is maninly used for the low consistency stock thickening. The water log installation height is not needed. It can replace traditional gravity cylinder thickener. In the same floor space, the throughout of the gravity disc thickener is serval times more than that of the gravity cylinder thickener, so a lot of space and power can be saved.

 

2. Performance and Working Principle

The pulp at consistency of 0.8-1.2% enters the vat and attached the disc sector, filtrate is guided by hollow shaft and discharged out at two end. Stock attached on sector is knocked off by high-pressure shower. The thickened stock at consistency of 3-4% flow over the plate of adjusting valve and into discharge chamber where it is out feed. The rotation speed of main shaft can be adjusted for required outlet consistency and capacity.

 

3. Strong Point

Thickening of broke or washing of low consistency pulp systems;

Compact design;

Variable speed drive, very low power consumption.

 

Main specification:

 

 

Type	ZNP2508	ZNP2510	ZNP2512	ZNP2514	ZNP2516	ZNP3510	ZNP3514	ZNP3512	ZNP3516
Diameter of Filtering plate   (mm)	Φ2500					Φ3500
Amount of disc (n)	8	10	12	14	16	10	12	14	16
Nominal area (m2)	60	75	90	105	120	150	180	10	20
Concentration of Input Pulp(%)	0.8-1.2
Concentration of Output Pulp(%)	3.5-4.5
Product capacity ONP(t/d)	0.9-1.2t/(m2.d)
Product capacity Aocc(t/d)	1.5-2.4t(m2.d)
Product capacity(Kw)	11			15		18.5	22		30

 

 

 

 

 

 

 

 

 

.