Specifications

1.large quantity of mud
2.anticorrosive processing
fessional manufacture of paper recycling machine

Paper pulp processing machine sludge dewatering machine  

 

Application

The equipment is used to concentrate mud in papermaking industry,municipal engineering and so on.

We will help you choose the reasonable dewatering machine and its feeding system and the control conditions of its auxiliary engine, according to your factory’s conditions, the amount and type of sludge.

 

Working principle

It is Mainly used for pulp material inspissations washing and dirty mud dehydration , which is in four areas, namely gravity dehydration, wedge re-pressure dehydration, swing dehydration and shear dehydration.

1. Gravity dehydration: Because of the high liquidity of liquid sludge, no compression capability, so the sludge get into the gravity dehydration area first. In this part it can remove the pretreated water, reduce the liquidity of sludge, make the floccules and granules come into being larger adhesion.
2. Wedge re-pressure dehydration: The sludge comes into the phases to dehydration with mini pressure, and almost lose all of the liquidity.
3. Swing dehydration: After the water of free water and floccules were removal mainly. Here comes the swing dehydration area. It improve the net belt tension gradually, through diameter’s change of the roller, and formed gradually dehydration area.
4. Shear dehydration: When the mesh belt clip mud get into roller with smaller diameter, the squeeze power comes into being by filters tensile force put the shaped sludge into the two filters belt. Then dehydration by the shear power.

Main specification

Type	HD-1	HD-2	HD-3	HD-4	Note
Width of Net (mm)	1500	2000	2500	3000	Pneumatic (manual) adjust deviation, pneumatic (manual) tensioner, anticorrosive processing.
Speed of Belt (m/min)	1.5-8
Concentration of Input pulp (%)	1.5-4
Concentration of Output pulp(%)	20-30
Pressure of Washing Water(Mpa)	≥0.5
Quantity of Mud (t/d)	110- 280	10-380	210-480	260-400
Motor power(Kw)	2.2+1.1	3.0+1.5	4.0+2.2	.5+2.2