polyamide 6 pipe elbow nylon6 elbow
MC Nylon (PA6) also named Monomer Casting Nylon is a engineering plastic which is widely usded in all industrial area . It’s light,high strength,wear-resisting,insulating and so on. So it is mainly used as gears and parts,chemical machinery,electric parts,automobile parts,chemical equipment,etc…
| Category | Performance | Units (conditions) | Numerical | ||
| Physical Performance | Density | g/cm3 | 1.14~1.16 | ||
| Water Absorption | % | 0.9 | |||
| Thermal Performance | Martin Heat Resistance | ℃ | 67~74 | ||
| Highest temperature | ℃ | 120 | |||
| Minimum temperature | ℃ | -40 | |||
| Distortion Temperature | ℃ | 120 | |||
| Heat Conductivity Coefficient | w/m .℃ | 0.28~0.29 | |||
| Coefficient of linear expansion | 10-5/℃ | 4~7 | |||
| Combustibility | self-extinguish | ||||
| Mechanical Performance | Tensile Strength | Mpa > | 75 | ||
| Elastic Tensile modulus | 104Mpa | 0.392(40000) | |||
| Compressive Strength | Mpa > | 100 | |||
| Bending strength | Mpa > | 140 | |||
| The impact strength (no gap) | KJ/m2 > | 510 | |||
| Elongation | % | 20 | |||
| Hardness | HPM(*) > | 80~90 | |||
| Fatigue Strength | 107kg/cm2 | 200 | |||
| Friction Coefficient | oil-free lubrication | 0.09~0.3 | |||
MC Nylon is a new engineering plastic.Due to its excellent overall performance,it has become an important material in engineering plastic.
(1).High strength:Bearing the load for a long time.
(2).Good resilience: Bending without deformation,Resistance to repeated shocks.
(3).Self-lubricating and Wear-resistant: Better than the bronze, cast iron, carbon steel, Reducing consumption, Saving energy.
(4).Lower noise and Damping.
(5). Lower hardness: no damage to the wear member.
(6).High chemical stability.
(7).Simplify maintenance of the machine, saving labor.
30 Years of production experience
Established in 1986, Jiangsu Hongfa specializes in researching, developing and manufacturing different kinds of Special Casting Nylon and composite reinforced nylon.
Various kinds of products
The company can provide steel frame reinforced nylon pipe, MC nylon pipe, nylon gear, nylon bushing, nylon pulley, nylon machine tool shield and etc.
Comprehensive quality management system
The company approved by GB/T 19001-ISO9001.2000, and has the professional QC team which can control the raw material purchase, products production, and after service.
Welcome to contact
Jeff
TEL:86-515-88667811
FAX:86-515-88667811
Mobile:+8618552467980
skype: jeff9212282