Name: Engineers available to service machinery drum pulper made in China
Brand: LeiZhan
Availability: InStock

Product Details

Engineers available to service machinery drum pulper made in China

Product Description

Main technical parameters:

Drum pulper for paper pulp stock is a new cylinder continuous pulping equipment. Before the area solutions for high-consistency pulping area, after the district for the screening area.

The high concentration of pulping area, waste paper is broken in the 14-18% concentration solution. Axial partitions on the cylinder wall, repeat the waste paper with up and drop the bottom of the cylinder, resulting in a moderate shear force and friction, so that the ink particles in the waste paper, plastic materials and hot melt adhesives and other substances from loose down the fiber.

The rear area of the cylinder dilution screening area, the slurry solution was broken to 3-5% concentration filter, good slurry into the slurry tank, and residue from the cylinder end of discharge. paper pulper machine

pulper machine

Type	ZG2500	ZG2750	ZG3000	ZG3250	ZG3500	ZG3750	ZG4000	ZG4250
Drum Dimeter (mm)	Φ2500	Φ2750	Φ3000	Φ3250	Φ3500	Φ3750	Φ4000	Φ4250
Processing capacity(t/d)	70-120	140-200	200-300	240-400	400-600	550-800	750-1000	1000-1400
Work capacity(%)	14-18
Motor power(Kw)	132-160	160-200	280-315	315-400	560-630	630-800	800-1000	1000-1400

paper pulper/ paper pulper machine

Rotor drum hydrapulper is the pulp engine in the waste paper pulp making process flow, it special suitable for the non-selected waste paper pulp.

It is a new type advanced China hot selling paper pulper finisher drum pulper

and a changeable product of traditional hydrapulper.

1. It can be realized in 14%-18% at high concentration, “moderate” to disperse fiber.

2. Keep the maximum length of fiber.

3. Low broke rate of impurity, with high efficiency, reduce the burden of the following procedures.

4. A low power consumption, reduce operating costs.

5. The friction effect effective liquid medicine mixing and high concentration conditions between the fibers is the ink particles fully separated from the fiber surface.

6. Fully sealed structure, saving steam and chemicals.

7. A wide range of raw material.

1.Unique wheel convey, to reduce friction, supply low failure rate.

2.No damage to the fiber and imourities.

3.Fewer matching sets save the cost of maintainence.

4.The only consumption of pulper lies in the rotation drum, which is half to one third of the hydraulic pulper. It saves much power than the traditional gear drive.

5.Combine the pulping, roughing with the deslagging, greatly save the cost.

6.Pulping density:14-18%

7.Consistency of out flow pulping:3-4%

Working site

The output is waste paper and other impurities.

Details of pulping equipment

incision of drum pulper

exclude wet and dry reject