IEC 60068-2-75 Universal Spring Operated Impact Hammer
USD $300 - $400 /Piece
Min.Order:1 Piece
Shenzhen Chuangxin Instruments Co., Ltd.
IEC60068 Universal Impact test Hammer used to test IK01 to IK06
1.Introduction:
(1) IEC60068-2-75 Spring Impact Hammer is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.
(2)After applying the impact with the hammer, the products is examined with accessibility probes to determine
access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards.
2.Application:
Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place. If moved too fast, the clamp may skip its arrester and will lock at its way back when the pulling force declines. Hold the device horizontally at it’s housing tube and press the (black) release cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached
3.Types:
Spring Operated Imapct Hammer | Energy | Tolerance Mistake |
0.14J | ±0.014J | |
0.20J | ±0.02J | |
0.35J | ±0.03J | |
0.50J | ±0.04J | |
0.70J | ±0.05J | |
1.00J | ±0.05J | |
2.00J | ±0.10J |
4.Technical parameters;
length:211mm;
weight:1250g;
OD:50 mm;
Hammer Weight:60g;
Hammer radius:10mm ;
Impact Components:including the hit ball handle the hammer,weight 250g, hammer head is made from white polyethylene imine first;
The release force of impact :<10N.
About us
Shenzhen Chuangxin Instruments Co., LTD was found in 2009 located in Shenzhen, Guangdong province, China.
We are specialized on different kinds of test equipments and main products are IEC test probes, gauges, spring hammer, glow wire tester, needle flame tester, tracking index, emc test system, LED test equipment, power supply and etc.
Our products and services are used by Research & Development establishments, Test Laboratories, Defense Establishments, Government Institutions & manufacturing industries to fulfill the clients' T&M requirements.