LED Sensor Bulb Light
USD $7 - $10 /Piece
Min.Order:50 Pieces
Shenzhen Bright Technology Industrial Ltd.
Specifications
n Voltage 85- 265VAC,50-60Hz
n Power 2.2-3.8W.
n Size: diameter 80mm.highness 91mm.
n Wieght: 110g.
n Light holder: E27 E26, B22
n LED QTY. 21 PCS
n Life Span: 50,000-80,000 hours.
n Material: PC
n Features: high efficiency light, long life and low optical attenuation new white LED technology. Has efficiency, Save electricity, saving-energy,long life, no radiation, environmental protection, etc
n Sensing technology: the adoption of advanced pyroelectric sensor technology and light sensor technology. With high sensitivity, strong anti-interference, low consumption, etc.
Product characteristics
n After the products are in the automatic induction working mode. With automatic induction, electric and control function. When someone in the detection range, environment, less than 10LUX illuminance automatically open. When the man left, will continue already set time after lighting, shut down automatically lighting. When the environment is more than 10LUX illuminance, on the contrary, standby.
n Induction Angle is 120 degrees, induction distance than 4.5m. Lighting delay time about 40 seconds (optional), more than 15 meters space illumination.
Install and use
Should try to close one head induction course of action
Described
When open source, the bright lights
When the environment, more than 10LUX illumination lamps in the work. Standby
Light bulb will be lighted, take one or two minutes to stability
Notes
Storage temperature: - 40 ° ~ 80 ° c, using temperature: - 20 ° ~ 50 °.
Environmental temperature is higher, sensitivity will decline, induction distance will be shortened.
IP22 level indoor light, Do not install the product to the outdoor.
Application
These products are widely applied in corridor, corridor, garage, a built-in wardrobe or cupboard, porch, toilet, kitchen, the basement of the place such as automatic lighting.