2500W Follow Spot Light

Specifications

2500W Follow Spot Light with DMX512 , spot light , stage equipment,Stage Lighting

Detailed Product Description

2500W Follow Spot Light

Feature:

Voltage: AC220-240V 50/60HZ
Power consumption: 2800W
Insurance: 15A
Source: HMI2500W
Function: overheating, electric shock transformer protection
Model:LS-8502B

Size: 1250 × 470 × 320mm

Net Weight: 25kg +15 kg
Gross Weight: 27kg +16 kg

It has two ways of controlling the lighting fixture. Follow spotlight HMI1200W. It can using separately.

1>, According to the controlling panel to control this lighting fixture, and the function button pls find as follows,

Pay attention : when you are choosing to control the lighting fixture by your hands, pls turn on the switch on the controlling panel and set up the geological code “I” to “ON”, preventing some interference.

WHITE , RED , YELLOW, BLUE, GREEN : these buttons all represents one color.

COLOR: the white light can decrease the lighting temperature of the color film.

OFF: turn off the switch

ON: turn on the switch.

STROBE: It can adjust the strobe frequency.

IRIS: represents the light circle, this button can be adjusted for the circle’s big or small.

LOLOR  TEMPERATURE: Decrease the light temperature, can control the white light beam freely and it can mixing the color by pressing this button.

2> When you are choosing DMX512 to control the lighting fixture, pls turn off the switch that on the controlling panel, and setup the geological code “10” to “ON”, in order to prevent the interference.

Every light all have a own geological code, in that case, it can be connected and controlled by the right signal.

The geological code is a channel number, the follow spotlight can obey the controlling from the controlling machine.

Pls find the calculate way of the geological code as follows,

the present geological code’s setup of the follow spotlight=the startup set number of the channels of te last lighting fixture+the basic channels of the controlling machine(DMX512)

Specification:

The first intelligent lighting machine: the start geological code’s number is 1

The channels quantity of the controlling machine should over or the same as the used channel which controlled by the number.

The Address NO. ‘s setup should Corresponding the number of the geological code.