Specifications
New Technology Mutil-Fuction Jump StarterUnique design
Compact functions
light weight on the go
New Technology Mini Mutilfunciton jump Starter
Function:12 V/1A car jump start,5V/2A cell phone ,Ipad,PSP,Mp3/Mp4 etc power charge
LED light(Light,Burst Light,SOS)
Products Pictures:
Technical Specification:
Dimension | 128*73*25mm |
Weight: | 300g |
Output: | 5V/2A for Mobile devices--- Android Tablet , Cell Phones, iPads and iPhones,PSP, MP3/MP4 and GPS.. 12V vehicle jump start Socket LED Flash light --- (light, burst flashing, SOS) |
Input: | 12V/1A |
Craniking Current: | 200A |
CCA | 222A |
Peak Current:
| 400A |
Parts List:
# | Parts Name | Quantity |
1 | Host | 1 |
2 | Cigarett Lighter charger | 1 |
3 | 3 in 1 join cable | 1 |
4 | Home Adapter | 1 |
5 | Jumper clamps | 1 |
6 | Manual | 1 |
Jump start 12V vehicle Instruction:
1. Make sure that the number of indicators is not less than 3 ones.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from EPOWER and disconnect RED and BALCK clamps to the vehicle battery terminals within 30 seconds.
6. Leave the vehicle's engine running.
Charging Cell Phone or Tablet Instruction:
1. Plug the switch cable to USB 5V /2A output port.
2. Select appropriate connector for your cell phone or tablet and connect it to any of them,
EPOWER can identify and charge the electronic device automatically.
The indicators will be on when the device is charging