Name: Heater
Brand: DRAGONPOWER
Availability: InStock

Product Details

Specifications

Heater:
Mica/ceramic, cast aluminum/copper, induction, cartridge, tubular, immersion, infrared, coil heater, etc..

Product Description

Heater:

Starting from 1978, as the largest heater producer for plastic industry, DragonPower has been located in China,

covering nearly 30,000 sqm, producing all types of industrial heaters including air cooling and water cooling heaters,

ceramic and mica heaters, cast aluminum and bronze heaters,cartridge and nozzle spring heaters, etc. Products are

CE (Tuv) and RoHS certified.
DragonPower also supplies energy saving heaters including induction heaters (save 30-80% energy) and heater insulation jackets (save 25-40% energy). These energy-saving heaters have brought to our customers following benefits.
1. Much faster pre-heating (heating up time is shortened by 1/3 to 1/2).
2. Significant saving on energy cost.
3. Make your factory a better place to work, esp. in summer (minimum heat loss to environment).
4. Better quality in plastic products (induction heating is more even).

Heater - Induction heater:

Induction heating is the process of heating an electrically conducting object (usually a metal) by

electromagnetic induction, where eddy currents are generated within the metal and resistance

leads to Joule heating of the metal. The induction coil itself does not get heated. The heat generating

object is the heated object itself.

*Model*	*Diameter (mm)*	*Voltage(V)*	*Power(W)*	*Key Technical Indexes*
LK-DCGY-01	170	220	2000	1.Voltage: 220V-380V 2.Power: 2-50KW 3.Width of induction coils: 80-2000mm 4.Current: 5A-75A 5.Diameter of induction coils:≥80mm 6.MTBF(mean-time between failures:≥10000 hours 7.Work frequency: 10KHz-25KHz
LK –DCGY-02	230	220	2000
LK –DCGY-03	240	220	5000
LK –DCGY-04	260	380	5000
LK –DCGY-05	300	380	5000
LK –DCGY-06	350	380	50000
Note: Other models are available

Heater - Air cooling ceramic heater:

Plastic injection moulding machine

1. Hollow shaping machine/Blow-molding machine

2. Extrusion machine/Co-extrusion line

3. Raw material processing equipment

4. Pelletizing equipment

5. Granular machine

6. All types of plastics processing machines

Table

*Model*	*Extr Model*	*Zone #*	*Dimension (mm)*	*Voltage(V)*	*Power(W)*
LK-FQTC-Φ250X255	Twin-screw 58	1	Φ250X255	3X400	8000
LK-FQTC-Φ200X175		3	Φ200X175	230	2400
LK-FQTC-Φ152/Φ140X310		4	Φ152/Φ140X310	230	3600
LK-FQTC-Φ305X295	Twin-screw 68	1	Φ305X295	3X400	1000
LK-FQTC-Φ245X215		3	Φ245X215	230	3540
LK-FQTC-Φ165/Φ185X365		4	Φ165/Φ185X365	230	4600
LK-FQTC-Φ217X190	Twin-screw 45	1	Φ217X190	230	4000
LK-FQTC-Φ123X220	Twin-screw 45	3	Φ123X220	230	2600
LK-FQTC-Φ375X345	Twin-screw 80	1	Φ375X345	3X400	16000
LK-FQTC-Φ215/Φ195X430	Twin-screw 80	4	Φ215/Φ195X430	230	5930
LK-FQTC-Φ350X360	Twin-screw 92	1	Φ350X360	3X400	18000
LK-FQTC-Φ250X290		5	Φ250X290	3X400	4200
LK-FQTC-Φ250/Φ210X510		6	Φ250/Φ210X510	3X400	8600
LK-FQTC-Φ75X162	Single-screw 25		Φ75X162	230	1400
LK-FQTC-Φ90X220	Single-screw 30		Φ90X220	230	1500
LK-FQTC-Φ130X280	Single-screw 45		Φ130X280	230	2200
LK-FQTC-Φ140X325	Single-screw 60		Φ140X325	230	4000
LK-FQTC-Φ150X420	Single-screw 75		Φ150X420	400	5000
LK-FQTC-Φ175X460	Single-screw 90		Φ175X460	400	7000
LK-FQTC-Φ200X550	Single-screw 120		Φ200X550

Heater - ceramic heater:

DRAGONPOWER heaters are heater bands with ceramic insulation that are employed in the heating of the plastification cylinders of the plastic moulding machines. They are recommended when the operational temperature exceeds 280°C and in all cases presenting severe operational conditions. Thanks to the most advanced technical solutions, to the selection of the most appropriate materials and to the severe quality control procedures, they are characterised by:

1. Long Operational Life
2. Energy saving
3. Fast heat conduction
4. Uniform heat distribution
5. High electrical insulation
6. Easy installation
7. Great mechanical resistance to shocks and to tearing applied to the cables
8. Tight manufacturing tolerances

9. Various sizes, no limited max sizes.

Reference table:

*Model*	*Dimension(mm)*	*Voltage(V)*	*Power(W)*	*Key Technical Indexes*
LK-TC-Φ125X51	Φ125X51	230V	500W	1.Use condition: environment temperature -20~+60°C, Relative temperature <80% 2.Leakage current: <0.5MA 3.Insulation resistance:≥5Mo 4.Ground resistance: <0.1o 5.Voltage resistance: no electric breakdown for 1 minute under 1500V 6.Temperature endurance: 500-800°C 7.Power deviation:+5%-10%
LK-TC-Φ105X66	Φ105X66	230V	800W
LK-TC-Φ185X51	Φ185X51	230V	1100W
LK-TC-Φ190X85	Φ190X85	230V	1500W
LK-TC-Φ220X75	Φ220X75	230V	1700W
LK-TC-Φ180X90	Φ180X90	230V	1700W
Note: Other models are available according to your specifications. Please refer to the Order Guide

Heater - ceramic heater:

DRAGONPOWER heaters are heater bands with mica insulation that are employed in the heating of the plastification cylinders of the plastic moulding machines, Dies, Drums, Tanks, Injection and Blow Moulding Machinery and Plastic Extruders . They can be used when the operational temperature does not exceed 280°C. Thanks to the most advanced technical solutions, to the selection of the most appropriate materials and to the severe quality control procedures, they are characterised by:

Optimum heat conduction and uniform heat distribution
High electrical insulation
Constant Efficiency during lifetime
Easy installation
Great mechanical resistance to shocks and to tearing applied to the cables
Tight manufacturing tolerances
Long Operational Life.

Product picturers:

Packaging & Shipping

Plywood case or Paper carton for barrel heaters.

Our Services

Customized service

One to two years warranty period

Professional purchasing guid

Technial support