Overview: 

The mini jump starter is made of liion battery ,tiny,light and easy to carry in your bag or pocket, just 1/10 of lead acid battery jump starter. This jump starter with 8000mAh is very useful and convenient when your car battery is old,running out ,forget to turn off the light, and in a cold winter. It can start your car easily in 30 seconds ,save your time and money.What is more, italso can charge cell phone,tablet ,like a power Bank, LED lighting,flashing and SOS.

Specification: 

Accessories

Features:

              1.Can start petrol car under 3.0L

              2. Perfectly charge mobile phones,tablet,MP3s, MP4s

              3.LED Lighting ,flashing and SOS function.

              4. Smart cable with 6 protection to make user safe.

                          1).Reverse polarity protection,

                          2).Short circuit protection,

                          3).Over-charge protection,

                          4).Over-discharge protection,

                          5).Reverse-Charge protection

                          6).Over-temperature protection.

                The power light will turn off when it is charged fully within 10 seconds

                Automatically turns off when not in use for 30 seconds

1, Select the appropriate voltage and connector for the electronic device to charge / power supply 
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute. 
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged 
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash

5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.

6, Store the product in a cool and dry place and away direct sunlight.

Special note:

To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.