Specifications

Various electric heaters available:
1. Cr20Ni80 wire
2. HIgh watt density
3. ISO9001, CE, strict QC
4. Wide applications

Description:

The heater is mainly used for extrusion and casting moulding machines. It has a wide application in various machinery industries. The operation temperature can reach up to 650°C (bronze). In order to concentrate the heat to one direction on the injection face, the other sides of the product are covered by heat retention and heat insulation materials. So it has advantages such as advanced technology, high heat retention, long lifetime, etc. It is widely used in plastic extrusion, chemical fibre, blowing moulding machines.

 

Table:

Model	Dimension(mm)	Voltage(V)	Power(W)	Key Technical Indexes
LK-ZT-Φ360Χ180	Φ360Χ180	230	10000	1.Use condition: environment temperature -20~+60°C, Relative temperature <80% 2.Leakage current: <0.5MA 3.Insulation resistance: ≥8MΩ 4.Ground resistance: <0.1Ω 5.Voltage resistance: no electric breakdown for 1 minute under 1500V 6.Temperature endurance: 500-900°C 7.Power deviation: +8%-8%
LK-ZT-Φ180Χ70	Φ180Χ70	250	2000
LK-ZT-Φ250Χ100	Φ250Χ100	380	4000
LK-ZT-Φ130Χ60	Φ130Χ60	220	1500
LK-ZT- L400Χ270	L400Χ270	250	6000
LK-ZT- L310Χ276	L310Χ276	230	4200
LK-ZT- L150Χ100	L150Χ100	240	1000
LK-ZT- L190Χ145	L190Χ145	480	1500
LK-ZT- L198XW140XH214	L198XW140XH214	250	7000
LK-ZT- L150XW110XH180	L150XW110XH180	250	4000
LK-ZT- L100XW52XH100	L100XW52XH100	230	1000
LK-ZT-Φ360Χ180	Φ360Χ180	230	10000
Note: Other models are available according to your specifications. Please refer to the Order Guide

 

Order Guide

Please specify the following when ordering:

1. The inner diameter (mm) and length (mm) of heaters
2. Thickness of heaters
3. Voltage and power density
4. Gap of two pieces if applicable
5. Wiring type and position
6. Whether need air blowers
7. Order quantity
8. Delivery date

* It’s better to provide us with the drawings/pictures