150/300A 6000mAh emergency car jump starter for car start
USD $37.7 - $38.5 /Set
Min.Order:100 Sets
Shenzhen Carku Technology Co., Ltd.
150/300A 6000mAh Mulit-protection mini charger for car start and digital device charge
150/300A 6000mAh Mulit-protection battery booster for car start and digital device charge
150/300A 6000mAh Mulit-protection Li-po Jumper for car start and digital device charge
Patent Product - Multifunction 12V mini jump starter +power bank
mini multi-funcation Jump Starter power bank 12V mini car booster carku e-power
mini jump starter with starting power 300A multi-function jump starter 12v/24v jump starter
Multifunction jump start for 12V car - EPower--10 ( Patent Product )
Product parameters:
Size: | 139*75*15mm |
Weight: | 200g |
Output: | 5V/2.1A; --- Mobile phone, Tablet PC, PSP, MP3/MP4…
Jump start;--- 12V vehicle LED light --- (light, burst flashing, SOS) |
Input: | 14V/1A ,5V2A(Mricro USB) |
Starting Current: | 150A |
Peak Current: | 300A |
Parts List:
# | Parts Name | Quantity |
1 | Main Product | 1 |
2 | USB To microUSB Cable | 1 |
3 | Car charger | 1 |
4 | Jump cable battery clamps | 1 |
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER-2; If you unplug the cable, auto-sleep will start in five seconds
3, Four lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Three lights indicate 75% balance, twolights indicate 65% balance, one lights indicate 25% balance . The built-in battery is empty whenall LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/MP4 Pocket PC PDA,