Product Details

Product Description

With design patent Certificate, CE and RoHS Certificate;

This Water Chiller has been sold largely to Europe, South America, Asia and other markets;

Economic cooling equipment, easy to install and operate, compact and easily movable.

Feature:

• Comprehensive reference to the international radiator - type cooling system;
• Small thermolysis water cooler;
• With completed water flow and over high temperature alarm functions;
• Enclosed water tanks;
• Professional forced air - cooled radiator;
• Equipped with alarm output port.
• Multiple power specifications; CE approval; RoHS approval.

Advantage:

• CW-3000 laser water chiller is suitable for small water cooling device;
• Provide stable working conditions for laser devices;
• Water can be used for a long time;
• High heat dissipating capacity and not easy to be blocked;
• Alarm output port can quickly protect sensitive components

Used for

It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 /SL-1 Water Chiller if you want the emitting rate higher than 60 %.)

Benefit

• Specific disconnection alarm securing protection;
• High cost performance, low failure rate;
• Cool Capacity is 50W / ℃;
• Forces circulation, 9L cooling tank capacity;
• It can extend the using life of laser tube and ensure the engraving effect better.

Specs:

Model	CW-3000
Power Supply	AC100-120V, 60Hz / 200 -240V, 50Hz/60Hz
Current	0.9A , AC100-120V / 0.45A, AC 200 -240V
Tank Capacity	9L
Cooling	Radiator that forces the wind cooling
Amount of Cooling	50W / ℃
Way of Circulation	Water pump forces circulation
Maximum Flow	9L / min
Maximum Pumping Lift	10m
Inlet and Outlet	External Dia.: 10mm brass connector
Protection	Flow alarm

Maintenance

Cooling machine used in long term, you should open the machine and clean the dust in order to ensure
good heat dissipation.
You can use non – corrosive antifreeze if you are in the northern cold regions.

Product Uses

Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps.

A. Open the package and check the machine and all accessories.

B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water).

C. Connect the inlet and outlet hose between water cooler and laser engraving machine.

D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow).

E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm).

Caution
A cooler water condition in the absence of electricity is prohibited!
Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm.
Cooling machine no use for long time or in transport must keep emptying the cooling water.
To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10℃), and it will continue to work when the water temperature rose to higher (about 20℃).

Packing List

There is total one carton box.

Machine Dimension	470mm x 270mm x 370mm (18.5" x 10.6" x 14.6")
Machine Weight	9.5kg
Package	Carton box
Packing Size	600mm x 410mm x 500mm (23.6" x 16" x 19.7")
Gross Weight	14.5kg

Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!

Guangzhou Great Year Laser,All for better laser application solutions!

Contact:Nelson Wang

Mobile:0086 15011746737