Overview 16-ch Digital Video Converter is a fiber optic digital multiplexer for transmitting 16 channel high quality, uncompressed digital video, 8 channels of bi-directional data and audio, 4 E1 and one 100/1000M Ethernet over a single fiber cable. The product may also be maintained by our future product, FHC-6000M, a Network Management System. Applications for this product include CCTV, video surveillance, homeland security, ITS and etc. Features: - Transport 16 channels of High quality video over one optical fiber cable
- Exceed RS250C Medium Haul Specification for DG, DP and SNR.
- 8MHz video bandwidth, Compatible with NTSC, PAL and SECAM
- Uncompressed video, 8/10 Bit digital encoding/decoding
- Transmission of 8channels of any directional audio
- Provide 8 channels of bi-dir data compatible with RS232, RS422/RS485
- Support 4 E1, G.703 standard
- One 10M/100/1000M Ethernet compatible with IEEE802.3
- Easy installation and adjustment free
- Transmission up to 60KM over one fiber
Specifications: - Power:
220VAC/50Hz, standalone device for rack card - Indicators:
Power, Optical Link Status Video Signal, Audio status, Data traffic E1 Alarm, Ethernet Link Status - Video:
Format: PAL/NTSC/SECAM Video Signal: 1Vp-p, 75Ω Digitization: 8/10bits, 15M Sample Bandwidth 8MHz DG <1% DP <0.5o SNR >63dB(weighted) Connectors: 16 BNCs - Audio
Channel: 1~8, Bi-dir Audio Input: unbalanced, 600Ohms Digitization: 16bit@48k Frequency: 10Hz to 20KHz SNR: >70dB Connector: RJ45
| - Data:
Channel: 1~8, Bi-dir Data Rate: 0~~180Kbps/Ch Format: RS-232/RS-422/RS-485 Connector: RJ45 - E1 support:
Bit rate: 2.048Mb Line code: HDB3 Standard: ITU-T G.703 Connector: CC3(1.0/2.8) line impedance: 75ohm Jitter Performance: G.742 and G.823 - Ethernet:
Data Rate: 10/100/1000Mbps auto detect Standard: IEEE802.3 Connector: RJ45 Auto-negotiation with half/full duplex - Environment:
Operating: 0oC~+70oC Storage: -40oC~+85oC Humidity: 0-95% Non-Condensing - Physical Dimension:
434 * 66 * 200(mm), Standalone
|
Typical Pair Application Ordering Information Fiber Type | Video Transmitter | Video Receiver | Range | Notes | Singlemode (09/125μm) | FHC-6160T-W | FHC-6160R-W | 40Km | Video only | FHC-6160TnAnD-W | FHC-6160RnAnD-W | 20Km | | FHC-6160TnAnD-100M4E1 | FHC-6160RnAnD-100M4E1 | 40KM | Support 4 E1,100/1000M Ethernet | FHC-6160TnAnD-W | FHC-6160RnAnD-W | 40Km | | FHC-61607TnAnD-W | FHC-6160RnAnD-W | 60Km | | CWDM | FHC-6160T-Wllllrr | FHC-6160R-Wllllrr | rrKm | Video only | FHC-6160TnAnD-Wllllrr | FHC-6160RnAnD-Wllllrr | rrKm | |
Note: - Replace n within 1 through 8 for audio and data channel numbers
- Replace llll with CWDM wavelength, replace rr with requested distance
- Add -M at the end of model number for rack card product
- FC connectors standard, consult factory for other connectors
|