Specifications
1.Horse Styrene Free Epoxy Anchors for Dam Reinforcement
2.Styrene free
3.Good thixotropy
4.390ML
5.High Modulus
Horse Styrene Free Epoxy Anchors for Dam Reinforcement are an excellent alternate to Williams high capacity mechanical anchors when applications require close anchor spacing and small edge distances. Mechanical anchors require greater spacings and edge distances because of the lateral pressure placed on the drill hole due to anchor expansion. This expansion pressure is reduced with epoxy anchor systems.
Epoxy is ideal for passive dowels or anchors without a prestress load
Use Horse epoxy anchors for concrete anchors loaded in shear.
1. Applications
- Concrete Foundation Repair
- Seismic Retro-Fit
- Machinery Anchoring
- Anchors for Rail Systems
- Underwater Doweling
- Concrete Dock Repair and Construction
- Anchors Subject to Large Shear Loads
- Bridge Pier Reinforcement
- Pier Cap Repairs
- Dam Refacement
- General Plant Maintenance
- Column Anchors
- Light Poles
2. Advantages
a) Modified epoxy resin, styrene free, safe and non-toxic.
b) High strength, strong adhesion, good toughness, effect is equivalent to be embedded.
c) Aging resistance, acid-alkali resistance, no expansion, no creep, good seismic resistance performance and heat-resistant performance.
d) Low moisture sensitivity,long-term load stability in a damp environment.
e) Good thixotropy, especially suitable for anchoring the side or top.
f) Resin and hardener are packaged by twin cartridge and mixed simultaneously through the mixing nozzle by special dispenser gun, which do not need manual mixing.
3. Physical Data
Appearance | Component A (Resin): white paste |
Appearance | Component B (Hardener): red or black paste |
Volume solids | ≥99.5% (solvent free) |
Mix ratio of volume | A : B = 3 : 1 |
Density of A & B mixed | 1.50 ± 0.10 g/cm3 |
Viscosity of A & B mixed | 18~22 Pa·s |