Specifications

Concrete epoxy adhesive
1.Two-component modified epoxy resin adhesive
2.Strong thixotropic property
3.High initial cohesion

HM-120ML concrete adhesive is two-component modified epoxy resin adhesive.

 

1. Product Characteristics

1) Belong to modified epoxy resin adhesive, high initial cohesive force.

2) Wide mixing proportion, easy to control operational time.

3) Very strong thixotropic property, easy to scrape.

4) Cure at room temperature, fast curing speed, and can be adjusted according to the requirements of users.

5) Not shrink basically when curing.

6) High strength, good aging resistance and chemical resistance properties.

 

2. Application Range

1) Concrete surface defect repair and flattening construction, etc.

2) Match the use with HM-120M perfusion adhesive, seal the slit around in the construction of pouring and pasting of steel plate.

3) Match the use with HM-120L crack pouring adhesive, seal fracture surface and paste grouting nozzle when grouting and repairing the concrete cracks.

 

3. Technical Parameters

Mechanical performance	Steel – steel adhesion anti-shear strength	25°C	2 days	≥15 MPa
	Steel - steel adhesion tensile strength	25°C	2 days	≥18 MPa
	Steel – concrete (C30) anti-shear strength	25°C	2 days	Concrete (C30) damage
	Steel – concrete (C30) tensile strength	25°C	2 days	Concrete (C30) damage
Durability	Shear strength of artificial aging	2000 h		Strength decrease ≤10%

 

4.When you will need it? 

 

If you have cracks or splits in a cement slab or on concrete steps, you use concrete bonding adhesive 

to help cover them and repair the damage. Concrete bonding adhesive allows you to add or pour new 

cement onto an existing piece of concrete without having to first rough up the surface of the concrete. 

Without the adhesive, repairing concrete involves a lot more work. Using concrete bonding adhesive 

is not that difficult and this how-to guide will show you everything you need to know.

 

 Step 1 - Prepare the Surface

 

Remove any loose concrete rocks or stones from the surface area where you will be applying the 

concrete bonding adhesive. Also, make sure that the surface is relatively clean from dirt and debris.

Use a broom to sweep the surface before applying the adhesive.

 

Step 2 - Prepare the Adhesive

 

shake the container of concrete bonding adhesive vigorously for a couple of minutes before opening it.

Then, pour a portion of the concrete bonding adhesive into a separate container Mix Apart concrete 

bonding adhesive with B parts  . The first application of concrete bonding adhesive will serve as a

 primer for the final coat.

 

Step 3 - Prime the Damaged Concrete Surface

 

Take the paintbrush and apply the watered-down concrete bonding adhesive directly to the damaged concrete area where you will be applying 

new cement. Allow the primer coat of the concrete bonding adhesive to dry for a couple of hours 

before continuing.

 

Step 3 - Apply the Concrete Bonding Adhesive

 

Once the initial primer coat of adhesive has dried a bit, you can begin applying the final coat of 

concrete bonding adhesive. Use the paintbrush to apply the bonding adhesive (this time full strength)

 directly to the damaged concrete surface. When brushing on the concrete bonding adhesive, apply 

a thick coat of adhesive for the best results. Refer to the instructions on the container and wait for the 

prescribed drying time before continuing.

 

Step 4 - Mix and Apply New Cement

 

As soon as the concrete bonding adhesive is dry, follow the directions on the bag of cement for

 mixing the concrete and apply it to the top of the surface where the concrete bonding adhesive 

has been used. If you'll be applying a gypsum or finish plaster (instead of cement) on top of the 

concrete bonding adhesive, you should apply it while the adhesive is still tacky and not yet dry. 

Otherwise, apply regular concrete once the adhesive has dried.