Application

Stage lighting, Disco hall, Large literature performance, Gymnasium lighting, Temporary stage performance, City lighting system, TV station, Conference center, Professional showplace, Theme parks, Bar lighting and so on.

Specifications

1. Frequency-Agile: 2.4Ghz Wireless DM system with 512 channels and 7 groups
2. Input Voltage: AC100/240V, 50/60Hz
3. Work Voltage: 5V/500mA
4. Clor LED for ease of programming
5. One transmitter can communicate with multiple receivers
6. Frequencies: 126 frequency band Selects strongest channel automatically
7. # of units: up to 7 units can be set on an ID address
8. Effective Range: 700 Meters
9. Ma. Emit Power: 20dBm
10. Receive Sensitivity: -94dBm
11. DM connector: 3pin
12. Size: 25 220 mm
13. Weight: 0.2KG

Operating manual
1).ID code and LED color corresponding relationship:
1:RED
2:GREEN
3:RED+GREEN
4:BLUE
5:RED+BLUE
6:GREEN+BLUE
7:RED+GREEN+BLUE
2). Press key 1 time to indicate ID setting,,Press again to set IC,then ID value adding 1 each time you

press the switch.
3). Working condition:
LED constant lit up:No DM or wireless signal.
Red LED flash:Transmitting.
Green LED flash:receiving
4) RF frequency 2.400 - 2.525G,total 126 channels,its searching automatically,
5). ID Code 1-7 groups ID code,press KEY for setting,it only can work under same ID code of transmitter

and receiver. (Same LED Color)

1. Power on DM512 wireless received board and transmitted board.
2. Press Key button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DM data by no interfered frequency section, then receiver changescommunicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DM data more fast.
4. Communication was established correctly.

Caution:

1. Indoor use only.
2. 1 year warranty, repair, free replacement ecept damaged artificially.
3. The manufacturer will not offer free service in warranty period if any repaired or uncapped had happened
4. It is better to return to manufacturer if repair is a must, do not do any repairing job unless qualified electrician.
5. The working condition should be under temperature -20~+45 degree, 10%~90%RH, no congelation, so as to ensure its lifetime.
6. It can not be covered by any superstratum, it should be swept periodical to prevent dust.

Website: www: