Name: HORSE MANUFACTURE OF CARBON FABRIC PLATE
Brand: HORSE
Availability: InStock

Product Details

Specifications

HORSE MANUFACTURE OF CARBON FABRIC PLATE
1.Strengthen concrete structures
2.Convenient construction

HORSE MANUFACTURE OF CARBON FABRIC PLATE

Product Features

HORSE REINFORCED CARBON FABRIC PLATE used for concrete reinforcement It can be used for concrete

structures strengthening, steel plate reinforcement.

1, Light weight,easy to operate and not require large-scale machinery equipments

2,The shape and w 160000Mpa Carbon Fabric Sheet eight of components are not changed after reinforcement

3,The reinforcement effect of 1layer carbon plate is equivalent to 4~8layers carbon cloth

4,The visual inspection is easy to carry out after construction

Horse fiber carbon fabric / fiber reinforced plastic sheet

Typical Uses

Horse fiber carbon fabric / fiber reinforced plastic sheet 1,The remedy repair and strengthening of the plate and beam of concrete structures

2,The strengthening of openings around the wall and plate

3,The strengthening of beans of wooden buildings

4,The strengthening of bridge plate ,bridge pier and girder

5,The remedy repair and strengthening of tunnel and cable lines

Technical Parameters:

Property Index of Products	Adhesive of Carbon Fiber Sheets(Grade A)	Carbon Fiber Sheet(Grade A)	Carbon Fiber Sheet(Grade B)
Tensile Strength	≥40MPa	≥2400MPa	≥2000MPa
Elastic Modulus	≥2500MPa	≥1.6*105MPa	≥1.4*105MPa
Elongation Percentage	≥1.5%	≥1.7%	≥1.5%
Bending Strength	≥50MPa	/	/
Compressive Strength	≥70MPa	/	/
Pulling Bonding Strength along with Concrete	≥2.5MPa	≥2.5MPa	≥2.5MPa
Content of Non-volatile Matter and Solid	≥99%	/	/
Interlaminar Shear Strength	/	≥50MPa	≥40MPa
Volume Content of Fiber	/	≥65MPa	≥55MPa

	HM-1.2T	HM-1.4T
Thickness(mm)	1.2	1.4
Length(m)	100	100
Width(mm)	50/100	50/100
Weight(g/m)	80	120
Density	1.6

Directions for use

The surface of Construction shear reinforcement Carbon Fabric Clean carbon plate with solvent → mix adhesive →

coat adhesive on carbon plate and make it into circular arc shape →

paste carbon plate on the concrete and press with a hard rubber roller →

remove the excess adhesive → clean the surface of the carbon plate → conservation →

surface costing if needed.

The surface of component

Adjust the bond strength of the contact surface of concrete→

give remedy repair to concrete surface if needed→cost adhesive on the concrete surface→→

paste carbon on the concrete and press with a hard rubber roller→remove the excess adhesive→

clean the surface of the carbon plate→conservation→surface coating if needed

Points For Attention

The construction workers should take necessary productive measures (such as wearing masks, gloves, goggles, etc). Fire prevention and maintain good ventilation on scene

When the rolled products are united, the plate has the possibility of bounce, please give full attention

Carbon plate is conductive, be careful the electrical equipments around.

Transportation and Storage

The length of this products is 100m, the width is divided into 50mm,100,,.

The thickness is divided into 1.2mm,1.4mm

Roll into a ring and use a belt to bind.Other specifications can be customized