Specifications

45*3w plant growth light
1, Size:dia270x60mm
2. Flux:346lux/2m 163/3m
3.Light Area:square 79 square m/3m
4. 2 years warrty

 

90W specifications

PhotosContact

1.Use high efficient 3w LED as the light source , base on 45*3 high power LEDs with metal cover , built in 2 pcs 45w constant current source , it will more energy efficient
2.Input voltage : 85-264V,easy to use and safty , suitable for all the countries .
3.Lifespan : over 50000 hours.

Picture: 

 

Parameter:

Item	Value	Item	Value
Size	dia270x60mm	Power	90W (45*3W)
Input Voltage	AC85~264V	Lumens	≥2700 Lm
Input current	300mA	Lifespan	50,000 hours
Frequency	50/60 Hz	Color	R/B/W/O/Y
Working environment	-20~40°C	Lighting area	28 M²/3m
Inner box	340×340×1401PCS	GW	3kg/pcs
Carton box	600×340×340/4PCS	GW	12kg/4pcs

Specifications:

1. 90W LED grow light can replace the 270w-450w HPS , over 80% energy saving .
2. Base on  the 1w LED chip.
3.  Over  50000 hours .
4.  Our common light ratio :8:1 , 7:2 , 7:1:1  with the mixture of  red , blue , orange  ,yellow and  white lights , or  customized as your requests
5.  Blue LEDs can easily be added to enhance vegetative growth , red LEDs are good for promoting  the fruiting and flowering stage , our suggestions on the wavelength are red (620-630nm) , red(640-660nm) , blue (450-  460nm) , blue (460-470 nm) ,  You can choose the wavelength and color ratio which is most suitable for your plant growth
6. Built-in cooling system (thermostatically controlled fans ) solve the heat dissipation excellently
7. Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly   into AC85V-264V, no reflector & ballast needed.
8.  Ideal for all phases of plant growth, and works well with any indoor garden,  hydroponics or soil based.

Notice:
1. Indoor use only .
2.  Turn off the power before installment, don't touch the surface of the lights when light on
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,  where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light..
6. Installed position must be no shock, no fire hidden danger
7. The producst is non waterproof, so put it in the dry place .
8. Do not touch or/and knock the product body during working