Specifications

Lead acid battery 12V 150Ah
1)Sealed&maintenance free
2)AGM&ABS casing
3)High qualified & good service
4)Low self-discha

Sealed/Maintenance–Free

The valve regulated spill proof construction allows trouble-free safe operation in any position. There is no need to add electrolyte, as gases generated during the charge phase are recombined in a unique “oxygen cycle”.

Structure:

 

 

1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic

 

2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.

 

3. Separator: Import high quality AGM separator.

 

4. Positive Plates: PbCa grids minimize corrosion and prolong life.

 

5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly.

 

6. Vent Valve: Allows the release of excess gas automatically for safety.

 

Long Shelf Life

A low self-discharge rate, up to approximately 3% per month, may allow storage of fully charged batteries for up to a year, depending on storage temperatures, before charging becomes critical.

 

Deep Discharge Recovery

Special separators, advanced plate composition and a carefully balanced electrolyte system ensure that the battery has the ability to recover from excessively deep discharge.

 

Low Pressure Valve Regulators

All batteries feature a series of low pressure one-way relief valves. These valves safely release any excessive accumulation of gas inside the battery and then reseal.

 

High Discharge Rate

Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.

 

Wide Operating Temperature Range

SINGLANG batteries may be discharged over a temperature range of -40°C to +60°C (-40°F to + 140°F) and charged at temperatures ranging from -20°C to +50°C (-4°F to +122°F).

 

Rugged Construction

The high impact resistant battery case is made of nonconductive ABS plastic. The case materials impart great resistance to shock, vibration, chemicals and heat. Flame Retardant (FR) battery cases and lids are available where the end application dictates.

 

Long Service Life

Have a design life of up to five years in standby applications. In cyclical applications up to 1,000 charge/discharge cycles can be expected depending on average depth of discharge