360 degree hd PELCO-D Zoom Camera for video conferencing and distance learning
USD $199 - $699 /Set
Min.Order:1 Set
Shenzhen Oneking Technologies Co., Ltd.
HD Pan/Tilt/Zoom Cameras Compatible With Major Video Conferencing And Lecture Capture Codec
High-Quality Color Video Camera Compatible With Major Video Conferencing And Lecture Capture Codec
HD PTZ Video Conference Camera Ideally For Broadcast, Audiovisual And Videoconferencing System
Pan Tilt Zoom Webcam Compatible With Major Video Conferencing And Lecture Capture Codec
1080p Color PTZ Camera Compatible With Major Video Conferencing And Lecture Capture Codec
Features:
Performance:
Dimension:
Installation:
HD USB video conference camera specification:
Image Sensor | Sensor | 1/2.7″ HD color CMOS |
Signal System | PAL/NTSC | |
Minimum Scene illumination | 0.5Lux at F2.0 | |
White Balance | AUTO/Manual | |
Gain Control | AUTO | |
Back-light compensation | ON/OFF | |
S/N Ratio | >50db | |
Lens | Lens | f=5-15mm F=1.6 |
Iris | AUTO/Manual | |
Zoom | Fixed lens | |
Horizontal Angle of view | 19-41 degree | |
Video Output | USB Interface | |
Video format | MJPG/1080P29, 720P@30, YUY2/1080P@5,720P@9 | |
Control Decoder | EIA/RS-485, USB | |
Communication | EIA/RS-232(Bidirectional) | |
PTZ Control Protocol | VISCA,PELCO-D | |
Baud Rate | 9600/38400bps | |
Patrol tours | 4 | |
Preset | 64 | |
Save status after Power off | Support | |
Speed Matching Function | Support | |
Image Auto Flip | Support | |
Pan Speed | 0-280 degrees/s | |
Tilt Speed | 0-100 degrees/s | |
Pan Rotation Angle | 360 degrees | |
Tilt Rotation Angle | + 90 degrees, - 45 degree | |
Auto Pan Scan | Support | |
Boundary Scan | 0-359degree(Programmable) | |
Remoter Control | IR Wireless remote control P/T/Z | |
Power | DC12V ±10% 1.2A | |
Operation Temperature | 0°C~50°C | |
Environmental humidity | 0-95%RH(non-condensation) | |
Length X width X high | 124x120x145mm/220x175x220mm(NET/PACKAGE) | |
Weight | 640g/1100g(NET/PACKAGE) |
Accessories kits in package:
We are the professional manufacturer of Color Video Full HD PTZ Camera----
Symptom | Cause | Remedy |
The power of the camera is not turned on. | The supplied AC power adaptor is not connected to the DC IN 12V jack firmly, or the AC power cord is not inserted firmly into the AC power adaptor or the AC outlet. | Insert the power cord firmly as far as it will go. |
Not Turn On the Power switch as “ON”. | Turn On the Power switch as “ON”. | |
Insufficient frame rate detected | Cannot recognize USB 3.0 connection, but the USB 2.0 speed. | Make sure you connected USB 3.0 Cable, USB 3.0 connect, and firmly connect to USB 3.0 interface. |
Pan,tilt or zoom cannot be operated. | Any menu is displayed on the monitor screen. | Press the “Dome OSD” OR “Lens OSD” on the Camera remote control Unit to turn off the menu from the monitor screen. |
The panning or tilting range is limited | Pan/Tilt movement range is ± 45 degree. | |
The Remote Commander does not work. | The Camera Select button you pressed on the Remote Commander does not match the number set with the IR SELECT switch on the camera. | Press the Camera Select button corresponding to the IR SELECT SWITCH setting on the Camera. |
Used out of battery | Change new battery (AA x 2) | |
The VISCA control is not available with a computer connected to the camera. | The computer is not correctly connected to the camera. | Make sure the connection between the computer and camera is made correctly. Check that the VISCA control setting (RS-232C or RS-422) and the baud rate setting (9600 bps or 38,400 bps) are properly made with the BOTTOM switch on the bottom of camera and the COM Port which configured in your computer. |
The camera cannot be operated at all. |
| Pull out the plug of the power cord from the AC outlet, then reinsert it into the AC outlet after a while. |
Contact Icey by: