VISCA digital color ccd zoom camera
USD $599.00 - $599.00 /Set
Min.Order:1 Set
Shenzhen Oneking Technologies Co., Ltd.
VISCA digital color ccd zoom camera
Features of digital color ccd zoom camera :
{ USB 2.0 Interface
{ Smart design Standard Definition PTZ camera
{ Fast and smooth video handling
{ Low cost design for video conferencing
{ Speed Match
{ Auto/Manual focus/brightness/WB
{ RS-232C/VISCA Protocol
{ Boundary scanning
Performance of digital color ccd zoom camera :
{ 650TVL
{ 1/3 Sony Effio-E CCD
{ F=5-90 mm,F1.6-3.0
{ Pan ± 180 degree continuously
{ Tilt +120 degree, -120degree
{ 64 preset positions
{ 4 cruise lines
{ DC 12V, 2A
Dimension of digital color ccd zoom camera :
{ L 250mm x W 140mm x H145mm
{ N. Weight: 1.47kgs
{ G. Weight: 2.78kgs
Installation of digital color ccd zoom camera :
{ Desktop
{ Ceiling mount
{ Standard Tripod accessory
Image of digital color ccd zoom camera :
Specification of digital color ccd zoom camera :
Model Number | C-368 18x PTZ (USB option) | |
Image Sensor | Sensor | 1/3" SONY Effio-E CCD |
Signal System | PAL/NTSC | |
Illumination | 0.05Lux | |
White Balance | Auto/Manual | |
Gain Control | Auto | |
Back-light | On /Off | |
E-Shutter | 1 - 1/100,000s | |
Horizontal | 650TVL | |
S/N Ratio | >50db | |
Lens | Focus | f=5-90 mm F1.6 -3.0 |
Iris | Auto/Manual | |
Zoom | 18x Optical Zoom | |
Video Output | AV, S-VIDEO Output | |
Control Decoder | Built-in decoder | |
Communication | EIA/RS422, EIA/RS232 (Bidirectional) | |
PTZ Control Protocol | VISCA, PELCO-P, PELCO-D (optional) | |
Baud Rate | 4800/9600bps | |
Patrol Lines | 4 Patrol Lines | |
Preset Position | 64 Preset Position | |
Power-off Protection | Saved scanning or patrol line settings Automatically Before power off | |
Speed Matching | Slow down camera Pan/Tilt movement speed while camera zooming in | |
OSD Menu | To change parameters of camera or camera module from OSD Menu | |
Image Auto Flip | Image Auto Flip | |
Pan Speed | 1-280 degree per second | |
Tilt Speed | 1-100 degree per second | |
Pan Rotation Angle | 360 degree continuously | |
Tilt Rotation Angle | 240 degree | |
Auto Pan Scan | Support auto pan scanning | |
Boundary Scan | 0-359 degree (programmable) | |
Remoter Control | IR wireless remote controller P/T/Z | |
Power Supply | DC12V±10%, 1.2A | |
Working Temperature | 0-50℃ | |
Environment Humidity | 0-95%RH | |
Size(LxWxH) | 124X120X145mm | |
Weight | 1380g |
Accessories kits in package :
1x Color Video Camera
1x DC 12V/2A Power Adaptor
1x RS-232C/VISCA Cable
1x Installation brackets & screws
1x User’s manual
1x IR Remote Controller
Packaging of digital color ccd zoom camera :
Shipping of digital color ccd zoom camera :
We are the professional manufacturer of Color Video Full HD PTZ Camera----
Oneking Introduction of digital color ccd zoom camera :
Symptom | Cause | Remedy |
The power of the camera is not turned on. | The supplied AC power adaptor is not connected to the DC IN 12V jack firmly, or the AC power cord is not inserted firmly into the AC power adaptor or the AC outlet. | Insert the power cord firmly as far as it will go. |
Not Turn On the Power switch as “ON”. | Turn On the Power switch as “ON”. | |
Insufficient frame rate detected | Cannot recognize USB 3.0 connection, but the USB 2.0 speed. | Make sure you connected USB 3.0 Cable, USB 3.0 connect, and firmly connect to USB 3.0 interface. |
Pan,tilt or zoom cannot be operated. | Any menu is displayed on the monitor screen. | Press the “Dome OSD” OR “Lens OSD” on the Camera remote control Unit to turn off the menu from the monitor screen. |
The panning or tilting range is limited | Pan/Tilt movement range is ± 45 degree. | |
The Remote Commander does not work. | The Camera Select button you pressed on the Remote Commander does not match the number set with the IR SELECT switch on the camera. | Press the Camera Select button corresponding to the IR SELECT SWITCH setting on the Camera. |
Used out of battery | Change new battery (AA x 2) | |
The VISCA control is not available with a computer connected to the camera. | The computer is not correctly connected to the camera. | Make sure the connection between the computer and camera is made correctly. Check that the VISCA control setting (RS-232C or RS-422) and the baud rate setting (9600 bps or 38,400 bps) are properly made with the BOTTOM switch on the bottom of camera and the COM Port which configured in your computer. |
The camera cannot be operated at all. |
| Pull out the plug of the power cord from the AC outlet, then reinsert it into the AC outlet after a while. |
Contact of digital color ccd zoom camera :